The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography
Open accessAbstract
There is currently a requirement in many industries to inspect carbon fiber reinforced plastic (CFRP) components, such as those used in aircraft and for wind turbine blades to identify issues leading to potential failures. To detect surface cracks, pulsed eddy current (PEC) thermography is proposed as a powerful inspection technique, allowing the operator to observe the heating developed from the eddy current distribution in a structure using infrared imaging, detecting defects over a relatively wide area within a short time (of the order of milliseconds). In this paper, a PEC thermography inspection system for CFRP materials is studied and optimized. Using the system, the directional electrical conductivity of the CFRP material is observed through the surface heating pattern. Then, the normalized temperature rise and decay are investigated through the inspection of notches with varied depths and widths. The position invariance of the coil with respect to the notch along the fiber direction is also studied in the experiments. The work shows that PEC thermography can be used for defect detection and characterization through analysis of the surface heating pattern and the transient temperature change.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978 · cited 1×
“[25], [30] and for the cooling phase [31], [32]:”
Background
Cited by
Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components
Ciampa, F., Mahmoodi, P., Pinto, F., & Meo, M. (2018) · Sensors · doi:10.3390/s18020609 · Cited by 568
Analyses of internal structures and defects in materials using physics-informed neural networks
Zhang, E., Dao, M., Karniadakis, G. E., & Suresh, S. (2022) · Science Advances · doi:10.1126/sciadv.abk0644 · Cited by 393
Optically and non-optically excited thermography for composites: A review
Yang, R., & He, Y. (2016) · Infrared Physics & Technology · doi:10.1016/j.infrared.2015.12.026 · Cited by 308
Metadata
- Authors
- Cheng, L., & Tian, G. Y.
- Venue
- IEEE Sensors Journal
- Published
- 2011-12
- Volume
- 11
- Issue
- 12
- Pages
- 3261-3268
- ISSN
- 1530-437X (ISSN-L)
- 1558-1748
- OpenAlex
- W2154437080
- Cited by
- 224
- References
- 1
- FWCI
- 24.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography. https://app.cochat.ai/papers/10.1109/jsen.2011.2157492
- The paper
- Cheng, L., & Tian, G. Y. (2011). Surface Crack Detection for Carbon Fiber Reinforced Plastic (CFRP) Materials Using Pulsed Eddy Current Thermography. IEEE Sensors Journal. https://doi.org/10.1109/jsen.2011.2157492
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.