CoChat

Architecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer

Shahzad, Khurram, Cheng, Peng, Oelmann, Bengt · 2013 · IEEE Sensors Journal

The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.

Abstract

Vibration based condition monitoring is considered to be the most effective method for analyzing the performance of rotating machinery and for early fault detection. Traditional vibration analyzers used for this purpose provide wired interface(s) to connect sensors with the system that analyzes the vibration data. A wireless vibration analyzer can be useful to monitor and analyze the vibration of rotating as well as inaccessible parts of the machinery. However, for a wireless vibration analyzer, both the performance and power consumption are of major concern, especially for real-time tri-axes (horizontal, vertical, and axial) vibration data processing and analyses at a high sampling rate. To evaluate the performance of such an analyzer, we explore different architectures in order to realize a high-performance and low-power wireless vibration analyzer that can be used in addition to traditional analyzers. For this purpose, four different architectures have been implemented in order to evaluate them in terms of performance, power consumption, cost, and design complexity.

Overview

Integrity signals

Registry

Crossref · 10.1109/jsen.2012.2226238

Cites

20 of 20 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 14

  1. 2012, MODEL TL-2100
  2. 2012, TPS736
  3. 2012, CY62177DV30
  4. shreve, 1995, Signal Processing for Effective Vibration Analysis
  5. 2012, ADXL001
  6. 2012, SG-210SCB
  7. 2012, AD7980
  8. 2010, Spartan-6 FPGA SP605 Evaluation Kit
  9. 2012, CC2520
  10. 2012, AT32UC3B0256
  11. 2012, XPower
  12. 2012, Spartan-6 XCLS6X16-2CPG196 and XC6SLX45T FGG484-3C
  13. 2012, TS555I
  14. 2011, Spartan-6 FPGA Configuration

Cited by

See all 32

Metadata

Authors
Shahzad, K., Cheng, P., & Oelmann, B.
Affiliations
Mid Sweden University (SE)
Venue
IEEE Sensors Journal
Published
2013-02
Volume
13
Issue
2
Pages
670-682
ISSN
  • 1530-437X (ISSN-L)
  • 1558-1748
OpenAlex
W2086925983
Cited by
32
References
20
Citations by year
2025: 1 · 2024: 1 · 2023: 2 · 2021: 2 · 2018: 2 · 2017: 5 · 2015: 2 · 2014: 13 · 2013: 4
FWCI
8.81
Type
journal article
Language
en
Open access
closed
Locations
IEEE Sensors Journal (publishedVersion)
Topics
  • Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
  • Physical Sciences › Engineering › Control and Systems Engineering › Embedded Systems and FPGA Design
Keywords
vibration-based condition monitoring, rotating machinery, fault detection, low-power hardware design, high sampling rate, hardware architecture comparison

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.