CoChat

A CMOS Temperature Sensor With a Voltage-Calibrated Inaccuracy of $\pm$0.15$ ^{\circ}$C (3$\sigma$) From $-$55$^{\circ}$C to 125$^{\circ}$C

Open access
Souri, Kamran, Chae, Youngcheol, Makinwa, Kofi A. A. · 2013 · IEEE Journal of Solid-State Circuits
Cited by 232

The DOI matches its Crossref record.

Abstract

This paper describes the design of a low power, energy-efficient CMOS smart temperature sensor intended for RFID temperature sensing. The BJT-based sensor employs an energy- efficient 2nd-order zoom ADC, which combines a coarse 5-bit SAR conversion with a fine 10-bit ΔΣ conversion. Moreover, a new integration scheme is proposed that halves the conversion time, while requiring no extra supply current. To meet the stringent cost constraints on RFID tags, a fast voltage calibration technique is used, which can be carried out in only 200 msec. After batch calibration and an individual room-temperature calibration, the sensor achieves an inaccuracy of ±0.15°C (3σ) from -55°C to 125°C . Over the same range, devices from a second lot achieved an inaccuracy of ±0.25°C (3σ) in both ceramic and plastic packages. The sensor occupies 0.08 mm2in a 0.16 μm CMOS process, draws 3.4 μA from a 1.5 V to 2 V supply, and achieves a resolution of 20 mK in a conversion time of 5.3 msec. This corresponds to a minimum energy dissipation of 27 nJ per conversion.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/jssc.2012.2214831

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Souri, K., Chae, Y., & Makinwa, K. A. A.
Venue
IEEE Journal of Solid-State Circuits
Published
2013-01
Volume
48
Issue
1
Pages
292-301
ISSN
  • 0018-9200 (ISSN-L)
  • 1558-173X
OpenAlex
W2163297099
Cited by
232
References
0
FWCI
10.99
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.