A Low-Noise Design Technique for High-Speed CMOS Optical Receivers
The DOI matches its Crossref record.
Abstract
A careful comparison between alternative topologies to realize low-noise wideband TIAs is carried out in this work. In order to break the tradeoff between noise and bandwidth, the proposed front-end uses two stages, i.e. a low-noise narrowband transimpedance interface followed by an equalizer aimed at restoring the required bandwidth. The technique is especially effective for white noise components. The core first-stage amplifier exploits current reuse for minimum power consumption and is optimized for colored noise reduction. A net 4 × noise power reduction is achieved if compared with a design approach based on a traditional shunt-feedback TIA with the same bandwidth. A complete receiver, interfacing a commercial photodiode, and including the proposed two-stage front-end (TSFE), a limiting amplifier and a wideband output buffer has been realized in 65 nm CMOS. Optical communications tailored to 100GBASE-LR4 standard, which is specified for mid-to-long range transmissions at a channel rate of 25 Gb/s, are targeted. Realized prototypes show a sensitivity of -11.9 dBm at a BER of 10-12with a PRBS31 input pattern and a transimpedance gain of 83 dBΩ, while tolerating an overall input capacitance of 160 fF. To the best of the authors' knowledge, this is the best sensitivity performance achieved by 25-Gb/s optical receivers in CMOS, comparable to state-of-the-art BiCMOS realizations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ahmed, M. G., Kim, D., Nandwana, R. K., Elkholy, A., Lakshmikumar, K. R., & Hanumolu, P. K. (2021) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2021.3064248 · Cited by 18
Dziallas, G., Fatemi, A., Malignaggi, A., & Kahmen, G. (2021) · 2021 IEEE 20th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems (SiRF) · doi:10.1109/sirf51851.2021.9383400 · Cited by 4
“The design principles from [7] were applied to achieve a low-noise RX by limiting the BW of the input stage and equalizing the BW in a later stage using high-frequency peaking.”
Method
Metadata
- Authors
- Li, D., Minoia, G., Repossi, M., Baldi, D., Temporiti, E., Mazzanti, A., & Svelto, F.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2014-06
- Volume
- 49
- Issue
- 6
- Pages
- 1437-1447
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W1985342807
- Cited by
- 166
- References
- 0
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Low-Noise Design Technique for High-Speed CMOS Optical Receivers. https://app.cochat.ai/papers/10.1109/jssc.2014.2322868
- The paper
- Li, D., Minoia, G., Repossi, M., Baldi, D., Temporiti, E., Mazzanti, A., & Svelto, F. (2014). A Low-Noise Design Technique for High-Speed CMOS Optical Receivers. IEEE Journal of Solid-State Circuits. https://doi.org/10.1109/jssc.2014.2322868
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.