The DOI matches its Crossref record.
100 000 Frames/s 64 × 32 Single-Photon Detector Array for 2-D Imaging and 3-D Ranging
Open accessAbstract
We report on the design and characterization of a multipurpose 64 × 32 CMOS single-photon avalanche diode (SPAD) array. The chip is fabricated in a high-voltage 0.35-μm CMOS technology and consists of 2048 pixels, each combining a very low noise (100 cps at 5-V excess bias) 30-μm SPAD, a prompt avalanche sensing circuit, and digital processing electronics. The array not only delivers two-dimensional intensity information through photon counting in either free-running (down to 10-μs integration time) or time-gated mode, but can also perform smart light demodulation with in-pixel background suppression. The latter feature enables phase-resolved imaging for extracting either three-dimensional depth-resolved images or decay lifetime maps, by measuring the phase shift between a modulated excitation light and the reflected photons. Pixel-level memories enable fully parallel processing and global-shutter readout, preventing motion artifacts (e.g., skew, wobble, motion blur) and partial exposure effects. The array is able to acquire very fast optical events at high frame-rate (up to 100 000 fps) and at single-photon level. Low-noise SPADs ensure high dynamic range (up to 110 dB at 100 fps) with peak photon detection efficiency of almost 50% at 410 nm. The SPAD imager provides different operating modes, thus, enabling both time-domain applications, like fluorescence lifetime imaging (FLIM) and fluorescence correlation spectroscopy, as well as frequency-domain FLIM and lock-in 3-D ranging for automotive vision and lidar.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Photon-efficient imaging with a single-photon camera
Shin, D., Xu, F., Venkatraman, D., Lussana, R., Villa, F., Zappa, F., Goyal, V. K., Wong, F. N. C., & Shapiro, J. H. (2016) · Nature Communications · doi:10.1038/ncomms12046 · Cited by 325
Self-citationImaging and certifying high-dimensional entanglement with a single-photon avalanche diode camera
Ndagano, B., Defienne, H., Lyons, A., Starshynov, I., Villa, F., Tisa, S., & Faccio, D. (2020) · npj Quantum Information · doi:10.1038/s41534-020-00324-8 · Cited by 76
Self-citationA 60-m range 6.16-mW laser-power linear-mode LiDAR system with multiplex ADC/TDC in 65-nm CMOS
Liu, M., Liu, H., Li, X., & Zhu, Z. (2020) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2019.2955671 · Cited by 54
Moon, E., Barrow, M., Lim, J., Lee, J., Nason, S. R., Costello, J., Kim, H. S., Chestek, C., Jang, T., Blaauw, D., et al. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00160 · Cited by 31
“The detection limit is determined by the dark count rate of the SPAD, where the number of photons emitted by the μ LED ( N LED ) should exceed where η dura is the e ffi ciency of the optical data uplink, η SPAD is the detection e ffi ciency of the SPAD, DCR is the SPAD dark count rate, F is the noise margin (multiplier) f…”
BackgroundInfluential
Metadata
- Authors
- Bronzi, D., Villa, F., Tisa, S., Tosi, A., Zappa, F., Durini, D., Weyers, S., & Brockherde, W.
- Venue
- IEEE Journal of Selected Topics in Quantum Electronics
- Published
- 2014-11
- Volume
- 20
- Issue
- 6
- Pages
- 354-363
- ISSN
- 1077-260X (ISSN-L)
- 1558-4542
- OpenAlex
- W2321611335
- Cited by
- 171
- References
- 0
- FWCI
- 25.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 100 000 Frames/s 64 × 32 Single-Photon Detector Array for 2-D Imaging and 3-D Ranging. https://app.cochat.ai/papers/10.1109/jstqe.2014.2341562
- The paper
- Bronzi, D., Villa, F., Tisa, S., Tosi, A., Zappa, F., Durini, D., Weyers, S., & Brockherde, W. (2014). 100 000 Frames/s 64 × 32 Single-Photon Detector Array for 2-D Imaging and 3-D Ranging. IEEE Journal of Selected Topics in Quantum Electronics. https://doi.org/10.1109/jstqe.2014.2341562
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.