The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Diamond FET using high-quality polycrystalline diamond with f/sub T/ of 45 GHz and f/sub max/ of 120 GHz
Abstract
Using high-quality polycrystalline chemical-vapor-deposited diamond films with large grains (/spl sim/100 μm), field effect transistors (FETs) with gate lengths of 0.1 μm were fabricated. From the RF characteristics, the maximum transition frequency fTand the maximum frequency of oscillation fmaxwere /spl sim/ 45 and /spl sim/ 120 GHz, respectively. The fTand fmaxvalues are much higher than the highest values for single-crystalline diamond FETs. The dc characteristics of the FET showed a drain-current density I/sub DS/ of 550 mA/mm at gate-source voltage V/sub GS/ of -3.5 V and a maximum transconductance g/sub m/ of 143 mS/mm at drain voltage V/sub DS/ of -8 V. These results indicate that the high-quality polycrystalline diamond film, whose maximum size is 4 in at present, is a most promising substrate for diamond electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High Carrier Mobility in Single-Crystal Plasma-Deposited Diamond
Isberg, J., Hammersberg, J., Johansson, E., Wikström, T., Twitchen, D. J., Whitehead, A. J., Coe, S. E., & Scarsbrook, G. A. (2002) · Science · doi:10.1126/science.1074374 · Cited by 1,321
Self-citationHole-drift velocity in natural diamond
Reggiani, L., Bosi, S., Canali, C., Nava, F., & Kozlov, S. F. (1981) · Physical Review B · doi:10.1103/physrevb.23.3050 · Cited by 169
Cited by
Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges
Tsao, J. Y., Chowdhury, S., Hollis, M. A., Jena, D., Johnson, N. M., Jones, K. A., Kaplar, R. J., Rajan, S., Van de Walle, C. G., Bellotti, E., et al. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201600501 · Cited by 1,602
Diamond as an electronic material
Wort, C. J. H., & Balmer, R. S. (2008) · Materials Today · doi:10.1016/s1369-7021(07)70349-8 · Cited by 809
Diamond power devices: state of the art, modelling, figures of merit and future perspective
Donato, N., Rouger, N., Pernot, J., Longobardi, G., & Udrea, F. (2020) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/ab4eab · Cited by 315
Metadata
- Authors
- Ueda, K., Kasu, M., Yamauchi, Y., Makimoto, T., Schwitters, M., Twitchen, D. J., Scarsbrook, G. A., & Coe, S. E.
- Venue
- IEEE Electron Device Letters
- Published
- 2006-07
- Volume
- 27
- Issue
- 7
- Pages
- 570-572
- ISSN
- 0741-3106 (ISSN-L)
- OpenAlex
- W2119004371
- Cited by
- 276
- References
- 2
- FWCI
- 6.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.