The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Truly-Redundant Aerial Manipulator System With Application to Push-and-Slide Inspection in Industrial Plants
Abstract
We present the design, motion planning, and control of an aerial manipulator for non-trivial physical interaction tasks, such as pushing while sliding on curved surfaces-a task which is motivated by the increasing interest in autonomous non-destructive tests for industrial plants. The proposed aerial manipulator consists of a multidirectional-thrust aerial vehicle-to enhance physical interaction capabilities-endowed with a 2-DoFs lightweight arm-to enlarge its workspace. This combination makes it a trulyredundant manipulator going beyond standard aerial manipulators based on collinear multirotor platforms. The controller is based on a PID method with a “displaced” positional part that ensures asymptotic stability despite the arm elasticity. A kinodynamic task-constrained and control-aware global motion planner is used. Experiments show that the proposed aerial manipulator system, equipped with an Eddy current probe, is able to scan a metallic pipe sliding the sensor over its surface and preserving the contact. From the measures, a weld on the pipe is successfully detected and mapped.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ORB-SLAM: A Versatile and Accurate Monocular SLAM System
Mur-Artal, R., Montiel, J. M. M., & Tardos, J. D. (2015) · IEEE Transactions on Robotics · doi:10.1109/tro.2015.2463671 · Cited by 6,778
Cited by
Past, Present, and Future of Aerial Robotic Manipulators
Ollero, A., Tognon, M., Suarez, A., Lee, D., & Franchi, A. (2022) · IEEE Transactions on Robotics · doi:10.1109/tro.2021.3084395 · Cited by 498
Self-citationESO-based robust and high-precision tracking control for aerial manipulation
Cao, H., Li, Y., Liu, C., & Zhao, S. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3260874 · Cited by 87
Metadata
- Authors
- Tognon, M., Chavez, H. A. T., Gasparin, E., Sable, Q., Bicego, D., Mallet, A., Lany, M., Santi, G., Revaz, B., Cortes, J., & Franchi, A.
- Venue
- IEEE Robotics and Automation Letters
- Published
- 2019-04
- Volume
- 4
- Issue
- 2
- Pages
- 1846-1851
- ISSN
- 2377-3766 (ISSN-L)
- 2377-3774
- OpenAlex
- W2904009101
- Cited by
- 201
- References
- 1
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.