Disturbance-Observer-Based Compliance Control of Electro-Hydraulic Actuators With Backdrivability
The DOI matches its Crossref record.
Abstract
This letter proposes an intrinsically backdrivable electro-hydraulic torque actuator (EHTA) and associated control algorithms that could lead to the design of a high-performance interactive robot system. The EHTA consists of (electro-hydraulic) backdrivable servovalves and double vane rotary hydraulic actuators. It is represented as a flexible actuator model considering servovalve dynamics and fluid dynamics. In the flexible actuator structure, the interaction stability is not guaranteed because the EHTA is a noncollocated system. However, due to the use of backdrivable servovalves, the EHTA is rigidly represented in the finite frequency region that a robot operates in daily life; it has the property of finite frequency passivity. Based on this property, a disturbance observer was designed to compensate for friction effects and model uncertainties. Then, the compliance control was applied to the friction-free actuator. Consequently, we achieved the actuator with a torque sensitivity of 0.1 Nm and a maximum torque output of approximately 100 Nm. The proposed actuators and controllers were evaluated through experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
An extended state observer-based control design for electro-hydraulic position servomechanism
Shen, W., & Shen, C. (2021) · Control Engineering Practice · doi:10.1016/j.conengprac.2021.104730 · Cited by 60
Truong, H. V. A., Nam, S., Kim, S., Kim, Y., & Chung, W. K. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3323148 · Cited by 39
“Lee et al. [21] developed a compliance control for an EHA with a disturbance observer to suppress an effect of friction and thus exhibit asymptotic convergence for output regulation.”
BackgroundSelf-citationXu, Z., Liu, Q., & Yao, J. (2023) · ISA Transactions · doi:10.1016/j.isatra.2022.11.018 · Cited by 36
Cao, Q., & Su, X. (2023) · Applied Sciences · doi:10.3390/app13084931 · Cited by 10
Meng, F., Yan, H., Li, J., & Liu, X. (2022) · Machines · doi:10.3390/machines10121163 · Cited by 6
Metadata
- Authors
- Lee, W., & Chung, W. K.
- Venue
- IEEE Robotics and Automation Letters
- Published
- 2019-04
- Volume
- 4
- Issue
- 2
- Pages
- 1722-1729
- ISSN
- 2377-3766 (ISSN-L)
- 2377-3774
- OpenAlex
- W2911732852
- Cited by
- 22
- References
- 0
- FWCI
- 1.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Disturbance-Observer-Based Compliance Control of Electro-Hydraulic Actuators With Backdrivability. https://app.cochat.ai/papers/10.1109/lra.2019.2897178
- The paper
- Lee, W., & Chung, W. K. (2019). Disturbance-Observer-Based Compliance Control of Electro-Hydraulic Actuators With Backdrivability. IEEE Robotics and Automation Letters. https://doi.org/10.1109/lra.2019.2897178
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.