The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Efficient Analysis of Frequency-Selective Surfaces by a Simple Equivalent-Circuit Model
Abstract
The transmission and reflection properties of frequency-selective surfaces (FSSs) are evaluated through a simple and accurate first-order circuit approach. The approximate analysis, based on the parallel between real structure and a lumped-LC-network counterpart, is also useful for acquiring physical insights into the working principles of frequency-selective surfaces. The first part of the paper describes a technique for computing lumped parameters of the most common frequency-selective-surface elements. The L and C parameters representing a given frequency-selective-surface element are derived only one time, at normal incidence, and stored, so as to form a database. The second part of the paper deals with the derivation of simple relations allowing the generalization of the stored LC couples in the case where the frequency-selective surface is printed or embedded in arbitrarily thick dielectric slabs, when the incident angle is varied from normal incidence, or if a different periodicity with respect to the reference periodicity is adopted. The generalized lumped parameters are included in an equivalent transmission line for computing the response of generic frequency-selective-surface configurations with no additional computational effort. The results obtained through the simplified model presented here are verified by a careful comparison with MoM simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-impedance electromagnetic surfaces with a forbidden frequency band
Sievenpiper, D., Zhang, L., Broas, R. F. J., Alexopolous, N. G., & Yablonovitch, E. (1999) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/22.798001 · Cited by 4,258
Frequency Selective Surfaces: Theory and Design
Munk, B. A. (2000) · Wiley eBooks · doi:10.1002/0471723770 · Cited by 4,091
Techniques for analyzing frequency selective surfaces-a review
Mittra, R., Chan, C. H., & Cwik, T. (1988) · Proceedings of the IEEE · doi:10.1109/5.16352 · Cited by 1,074
Frequency selective surface and gridarray
Wu, T. (2014) · Cited by 929
Far-infrared properties of metallic mesh and its complementary structure
Ulrich, R. (1967) · Infrared Physics · doi:10.1016/0020-0891(67)90028-0 · Cited by 675
Equivalent circuit model for arrays of square loops
Langley, R. J., & Parker, E. A. (1982) · Electronics Letters · doi:10.1049/el:19820201 · Cited by 474
Double-square frequency-selective surfaces and their equivalent circuit
Langley, R. J., & Parker, E. A. (1983) · Electronics Letters · doi:10.1049/el:19830460 · Cited by 244
Frequency-selective surfaces to enhance performance of broad-band reconfigurable arrays
Erdemli, Y. E., Sertel, K., Gilbert, R. A., Wright, D. E., & Volakis, J. L. (2002) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.2002.807377 · Cited by 178
Improved empirical model for the Jerusalem cross
Langley, R. J., & Drinkwater, A. J. (1982) · IEE Proceedings H Microwaves Optics and Antennas · doi:10.1049/ip-h-1.1982.0001 · Cited by 136
Ohmic loss in frequency-selective surfaces
Raynolds, J. E., Munk, B. A., Pryor, J., & Marhefka, R. J. (2003) · Journal of Applied Physics · doi:10.1063/1.1565189 · Cited by 68
Cited by
Frequency Selective Surfaces: A Review
Anwar, R., Mao, L., & Ning, H. (2018) · Applied Sciences · doi:10.3390/app8091689 · Cited by 358
Quevedo-Teruel, O., Chen, H., Díaz-Rubio, A., Gok, G., Grbic, A., Minatti, G., Martini, E., Maci, S., Eleftheriades, G. V., Chen, M., et al. (2019) · Journal of Optics · doi:10.1088/2040-8986/ab161d · Cited by 259
Catenary Electromagnetics for Ultra‐Broadband Lightweight Absorbers and Large‐Scale Flat Antennas
Huang, Y., Luo, J., Pu, M., Guo, Y., Zhao, Z., Ma, X., Li, X., & Luo, X. (2019) · Advanced Science · doi:10.1002/advs.201801691 · Cited by 161
Metadata
- Authors
- Costa, F., Monorchio, A., & Manara, G.
- Venue
- IEEE Antennas and Propagation Magazine
- Published
- 2012-08
- Volume
- 54
- Issue
- 4
- Pages
- 35-48
- ISSN
- 1045-9243 (ISSN-L)
- OpenAlex
- W2035494349
- Cited by
- 508
- References
- 10
- FWCI
- 25.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.