The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Nonminimum-phase zeros - much to do about nothing - classical control - revisited part II
Abstract
The purpose of this article is to illuminate the critical role of system zeros in control-system performance for the benefit of a wide audience both inside and outside the control systems community. Zeros are a fundamental aspect of systems and control theory; however, the causes and effects of zeros are more subtle than those of poles. In particular, positive zeros can cause initial undershoot (initial error growth), zero crossings, and overshoot in the step response of a system, whereas nonminimum-phase zeros limit bandwidth. Both of these aspects have real-world implications in many applications. Nonminimum-phase zeros exacerbate the tradeoff between the robustness and achievable performance of a feedback control system. From a control-theoretic point of view, a nonminimum-phase zero in the loop transfer function L is arguably the worst feature a system can possess. Every feedback synthesis methodology must accept limitations due to the presence of open-right-half-plane zeros, and the mark of a good analysis tool is the ability to capture the performance limitations arising from nonminimum-phase zeros.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Horn, R. A., & Johnson, C. R. (1985) · Cited by 22,203
Horn, R. A., & Johnson, C. R. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810817 · Cited by 10,280
Multivariable Feedback Control: Analysis and Design
Skogestad, S., & Postlethwaite, I. (1996) · Cited by 6,312
Kailath, T. (1980) · Cited by 6,215
Ioannou, P., & Sun, J. (1995) · Medical Entomology and Zoology · doi:10.1109/acc.1984.4171550 · Cited by 5,663
Weiss, M. (1997) · Automatica · doi:10.1016/s0005-1098(97)00132-5 · Cited by 5,495
Linear Optimal Control Systems
Kwakernaak, H., Sivan, R., & Tyreus, B. N. D. (1974) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3426828 · Cited by 4,976
Adaptive filtering, prediction and control
Ioannou, P. (1985) · Automatica · doi:10.1016/0005-1098(85)90014-7 · Cited by 4,480
Narendra, K. S., & Annaswamy, A. M. (1989) · Cited by 3,988
Doyle, J. C. (2002) · IEEE Conference on Decision and Control (CDC) · doi:10.1109/cdc.1996.572756 · Cited by 3,742
Adaptive filtering prediction and control
Goodwin, G. C., & Sin, K. S. (1984) · Cited by 3,400
Doyle, J. C., Francis, B. A., & Tannenbaum, A. (1992) · Cited by 3,085
(1991) · Mathematics and Computers in Simulation · doi:10.1016/0378-4754(91)90038-5 · Cited by 2,437
State-Space and Multivariable Theory
Rosenbrock, H. H., & MacFarlane, A. G. J. (1972) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1972.4309115 · Cited by 2,184
Control system synthesis: A factorization approach
(1986) · Automatica · doi:10.1016/0005-1098(86)90022-1 · Cited by 2,169
Maciejowski, J. M. (1989) · Cited by 1,523
Goodwin, G. C., Graebe, S. F., & Salgado, M. E. (2000) · Prentice Hall PTR eBooks · Cited by 1,465
Maciejowsk (1990) · Addison-Wesley Longman Publishing Co., Inc. eBooks · Cited by 1,447
Bogaevski, V. N., & Povzner, A. (1991) · Applied Mathematical Sciences · doi:10.1007/978-1-4612-4438-7_1 · Cited by 1,384
Rossenwasser, E. N., & Lampe, B. P. (2000) · Communications and Control Engineering · doi:10.1007/978-1-4471-0521-3 · Cited by 1,150
Åström, K. J., Hagander, P., & Sternby, J. (1984) · Automatica · doi:10.1016/0005-1098(84)90062-1 · Cited by 895
WMR control via dynamic feedback linearization: design, implementation, and experimental validation
Oriolo, G., De Luca, A., & Vendittelli, M. (2002) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2002.804116 · Cited by 796
Perdikaris, G. A. (1991) · Springer eBooks · doi:10.1007/978-94-015-7929-2 · Cited by 700
Fundamental Limitations in Filtering and Control
Seron, M. M., Braslavsky, J. H., & Goodwin, G. C. (1997) · Communications and Control Engineering · doi:10.1007/978-1-4471-0965-5 · Cited by 664
Right half plane poles and zeros and design tradeoffs in feedback systems
Freudenberg, J. S., & Looze, D. P. (1985) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1985.1104004 · Cited by 636
Matrix Mathematics: Theory, Facts, and Formulas with Application to Linear Systems Theory
Bernstein, D. S. (2005) · Cited by 632
Self-citationControl of linear systems using generalized sampled-data hold functions
Kabamba, P. (1987) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1987.1104711 · Cited by 446
Trade-offs in linear control system design
Middleton, R. H. (1991) · Automatica · doi:10.1016/0005-1098(91)90077-f · Cited by 316
Limitations on maximal tracking accuracy
Chen, J., Qiu, L., & Toker, O. (2000) · IEEE Transactions on Automatic Control · doi:10.1109/9.839960 · Cited by 200
Zero: The Biography of a Dangerous Idea
Seife, C. (2000) · Cited by 180
Sensitivity integral relations and design trade-offs in linear multivariable feedback systems
Chen, J. (1995) · IEEE Transactions on Automatic Control · doi:10.1109/9.467680 · Cited by 141
On undershoot and nonminimum phase zeros
Vidyasagar, M. (1986) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1986.1104289 · Cited by 102
Performance limitations in the robust servomechanism problem for discrete-time lti systems
Jemaa, L. B., & Davison, E. J. (2003) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2003.815010 · Cited by 39
Unfolding the zero structure of a linear control system
Berg, J. M., & Kwatny, H. G. (1997) · Linear Algebra and its Applications · doi:10.1016/s0024-3795(96)00156-5 · Cited by 13
Cited by
Hasan, M., Goshtasbi, A., Chen, J., Santare, M. H., & Ersal, T. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0371806jes · Cited by 25
Metadata
- Authors
- Hoagg, J. B., & Bernstein, D. S.
- Venue
- IEEE Control Systems
- Published
- 2007-06
- Volume
- 27
- Issue
- 3
- Pages
- 45-57
- ISSN
- 1066-033X (ISSN-L)
- 1941-000X
- OpenAlex
- W2012519971
- Cited by
- 271
- References
- 34
- FWCI
- 12.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.