The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors
Abstract
The authors attempt to identify the various causes of stator and rotor failures in three-phase squirrel cage induction motors. A specific methodology is proposed to facilitate an accurate analysis of these failures. It is noted that, due to the destructive nature of most failures, it is not easy, and is sometimes impossible, to determine the primary cause of failure. By a process of elimination, one can usually be assured of properly identifying the most likely cause of the failure. It is pointed out that the key point in going through this process of elimination is to use the basic steps of analyzing the failure class and pattern, noting the general motor appearance, identifying the operating condition at the time of failure, and gaining knowledge of the past history of the motor and application.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protection of Induction Motors Against Unbalanced Voltage Operation
Cummings, P. B., Dunki-Jacobs, J. R., & Kerr, R. H. (1985) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1985.349499 · Cited by 100
Cited by
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
Current Signature Analysis to Detect Induction Motor Faults
Thomson, W. T., & Fenger, M. (2001) · IEEE Industry Applications Magazine · doi:10.1109/2943.930988 · Cited by 1,139
A Review of Stator Fault Monitoring Techniques of Induction Motors
Siddique, A., Yadava, G. S., & Singh, B. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.837304 · Cited by 591
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544
Review of condition monitoring of rotating electrical machines
Tavner, P. J. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070280 · Cited by 531
Metadata
- Authors
- Bonnett, A. K., & Soukup, G. C.
- Venue
- Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference
- Publisher
- IEEE
- Published
- 2002-12-09
- Pages
- 22-42
- ISSN
- 0190-2172 (ISSN-L)
- OpenAlex
- W1563221881
- Cited by
- 489
- References
- 1
- FWCI
- 45.73
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.