The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A general unified approach to modelling switching DC-tO-DC converters in discontinuous conduction mode
Abstract
A method for modelling switching converters in the discontinuous conucction mode is developed, whose starting point is the unified state-space representation, and whose end results is a complete linear circuit model which correctly represents all essential features, namly, the input, output, and transfer properties (static dc as well as dynamic ac small signal). While the method is generally applicable to any switching converter operating in the discontinuous conduction mode, it is extensively illustrated for the three common power stages (buck, boost, and buck-boost). The results for these converters are then easily tabulated owing to the fixed equivalent circuit topology of their canonical circuit model. The outlined method lends itself easily to investigation of the discontinuous conduction mode in more complex structures (cascade connection of buck and boost converters, for example), in which more thean one inductor current may become discontinuous. As opposed to other modelling techniques, the new method considers the discontinuous conduction mode as a special case of the continuous conduction mode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A general unified approach to modelling switching-converter power stages
Middlebrook, R. D., & Cuk, S. (1976) · 1976 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1976.7072895 · Cited by 1,790
Self-citation
Cited by
Simplified analysis of PWM converters using model of PWM switch. II. Discontinuous conduction mode
Vorperian, V. (1990) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/7.106127 · Cited by 787
Switching converters with wide DC conversion range
Maksimovic, D., & Cuk, S. (1991) · IEEE Transactions on Power Electronics · doi:10.1109/63.65013 · Cited by 637
Self-citationDefinitions and Applications of Dynamic Average Models for Analysis of Power Systems
Chiniforoosh, S., Jatskevich, J., Yazdani, A., Sood, V., Dinavahi, V., Martinez, J. A., & Ramirez, A. (2010) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2010.2043859 · Cited by 306
Modeling current-programmed buck and boost regulators
Middlebrook, R. D. (1989) · IEEE Transactions on Power Electronics · doi:10.1109/63.21871 · Cited by 288
Self-citationHsu, S.-P., Brown, A., Rensink, L., & Middlebrook, R. D. (1979) · 1979 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1979.7081037 · Cited by 279
Self-citation
Metadata
- Authors
- Cuk, S., & Middlebrook, R. D.
- Venue
- 1977 IEEE Power Electronics Specialists Conference
- Publisher
- IEEE
- Published
- 1977-06
- Pages
- 36-57
- ISSN
- 0275-9306 (ISSN-L)
- OpenAlex
- W2062866137
- Cited by
- 439
- References
- 1
- FWCI
- 14.98
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A general unified approach to modelling switching DC-tO-DC converters in discontinuous conduction mode. https://app.cochat.ai/papers/10.1109/pesc.1977.7070802
- The paper
- Cuk, S., & Middlebrook, R. D. (1977). A general unified approach to modelling switching DC-tO-DC converters in discontinuous conduction mode. 1977 IEEE Power Electronics Specialists Conference. https://doi.org/10.1109/pesc.1977.7070802
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.