Parameter design principle of the arm inductor in modular multilevel converter based HVDC
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper describes two distinctive functions of the arm inductor in the modular multilevel converters (MMC): suppressing the circulating current and limiting the fault current rise rate. Based on the equality of the instantaneous power, the characteristics of the circulating current are analyzed and demonstrated that it flows through the three phase of the converter in negative sequence at double-fundamental frequency. The relationship between the amplitude of the circulating current and the value of the arm inductor is discussed, and the first principle to design the parameters is proposed. The second principle to design the parameters is based on the calculation of the fault current rise rates, with different values of the arm inductors. A detailed PSCAD/EMTDC model of MMC is developed. Steady state simulation proves the existence of the circulating current at double fundamental frequency. Simulation results show a close agreement with the calculation of the circulating current, with different arm inductor parameters. The fault between the DC terminals of the converter is investigated; the results verify the above parameter design principles of the arm inductor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 1×
“[4-7] investigated the basic operation principle and modulation scheme of CHB topology.”
Background
Cited by
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210
Tu, Q., Xu, Z., & Xu, L. (2011) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2011.2115258 · Cited by 1,387
“The circulating current in each phase is superimposed on to a dc current component that provides the actual dc/ac power transfer [21].”
BackgroundMethodInfluentialSelf-citationA Steady-State Analysis Method for a Modular Multilevel Converter
Song, Q., Liu, W., Li, X., Rao, H., Xu, S., & Li, L. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227818 · Cited by 503
Li, S., Wang, X., Yao, Z., Li, T., & Peng, Z. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329059 · Cited by 343
Zhang, M., Huang, L., Yao, W., & Lu, Z. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2269140 · Cited by 292
Metadata
- Authors
- Tu, Q., Xu, Z., Huang, H., & Zhang, J.
- Venue
- 2010 International Conference on Power System Technology
- Publisher
- IEEE
- Published
- 2010-10
- Pages
- 1-6
- OpenAlex
- W2013651205
- Cited by
- 238
- References
- 1
- FWCI
- 6.99
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.