Synthesis of new nonlinear network elements
The DOI matches its Crossref record.
Abstract
The basic problem of synthesizing a nonlinear resistor, inductor, or capacitor with a prescribed i-v, φ-i, or q-v curve is solved by introducing three new linear two-port network elements, namely the mutator, the reflector, and the scalor. The mutator has the property that a nonlinear resistor is transformed into a nonlinear inductor, or a nonlinear capacitor, upon connecting this resistor across port two of an appropriate mutator. The reflector has the property that a given i-v, φ-i, or q-v curve can be reflected about an arbitrary straight line through the origin. The scalor is characterized by the property that any i-v, φ-i, or q-v curve can be compressed or expanded along a horizontal direction, or along a vertical direction. Using these new elements as building blocks, it is shown that any prescribed single-valued (which need not be monotonic) i-v, φ-i, or q-v curve can be synthesized. Active circuit realizations for each of these new elements are given. Laboratory models of mutators, reflectors, and scalors have been built using discrete components. Oscilloscope tracings of typical mutated, reflected, and scaled i-v, φ-i, and q-v curves are given. The experimental results are in good agreement with theory at relatively low operating frequencies. The practical problems that remain to be solved are the stability and frequency limitation of the present circuits.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 16
- reich, 1961, Functional Circuits and Oscillators
- hemingway, 1961, Applications of the constant current diode, Electronics, 60
- carroll, 1965, Microelectronic Circuits and Applications, 234
- kuh, 1967, Theory of Linear Active Networks
- 10.1002/j.1538-7305.1961.tb03988.x · doi:10.1002/j.1538-7305.1961.tb03988.x
- chua, 1968, Some group theoretic properties of mutators, rotators, reflectors, and scalors, Purdue Semi-Annual Research Summary
- 10.1049/el:19680091 · doi:10.1049/el:19680091
- 10.1109/PROC.1967.6016 · doi:10.1109/proc.1967.6016
- 10.1109/PROC.1967.6015 · doi:10.1109/proc.1967.6015
- chua, 1968, Optimal nonlinear network synthesis, Purdue Semi-Annual Research Summary
- 10.1109/PROC.1967.6018 · DOI
- su, 1965, Active Network Synthesis
- chua, 1967, the rotator—a new network component, Proceedings of the IEEE, 55, 1566, 10.1109/PROC.1967.5908 · doi:10.1109/proc.1967.5908
- chua, 1967, Introduction to Nonlinear Network Theory
- desoer, 1966, Basic Circuit Theory
- zimmermann, 1959, Electric circuit theory, 62
Cited by
Memristor—The Missing Circuit Element
Chua, L. (1971) · IEEE Transactions on Circuit Theory · doi:10.1109/tct.1971.1083337 · Cited by 10,268
Self-citationIMPLEMENTING MEMRISTOR BASED CHAOTIC CIRCUITS
MUTHUSWAMY, B. (2010) · International Journal of Bifurcation and Chaos · doi:10.1142/s0218127410026514 · Cited by 604
MUTHUSWAMY, B., & CHUA, L. O. (2010) · International Journal of Bifurcation and Chaos · doi:10.1142/s0218127410027076 · Cited by 514
Self-citationDevice modeling via nonlinear circuit elements
Chua, L. (1980) · IEEE Transactions on Circuits and Systems · doi:10.1109/tcs.1980.1084742 · Cited by 277
Self-citation
Metadata
- Authors
- Chua, L. O.
- Venue
- Proceedings of the IEEE
- Published
- 1968
- Volume
- 56
- Issue
- 8
- Pages
- 1325-1340
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2010044405
- Cited by
- 82
- References
- 0
- FWCI
- 2.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.