Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 270

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Time-domain electromagnetics and its applications

Bennett, C.L., Ross, G.F.·1978·Proceedings of the IEEE

Abstract

The purpose of this paper is to introduce the reader to the elments of time-domain electromagnetics, which includes baseband-pulse technology and target-signature analysis. Baseband pulses are video or carrierless pulses of very short duration, whose spectral content is concentrated primarily from zero frequency through the microwave region of the spectrum. Work in baseband technology began more than ten years ago at the Sperry Research Center with emphasis primarily on its use as an analytical tool, initially to explore the properties of microwave networks [1], and subsequently to determine the intrinsic properties of materials [2]. The experimental phases of these studies were aided by the pioneering development by the Hewlett-Packard Company of their sampling oscilloscope [3]. These techniques were further extended to experimentally analyze and synthesize antenna radiating and receiving elements [4], [5]. Success in the antenna area led to the development of an indoor ground-plane scattering range to measure the impulse properties of targets or obstacles [6]. This type of range obviated the need for an expensive anechoic chamber since time-gating techniques permitted unwanted reflections from the walls and ceilings to be easily eliminated. A sampling oscillosope and an instrumentation computer were used to process target-signature data as a function of illumination angle. At about the same time, analytical techniques were developed which permitted target-signature analysis to be carried out efficiently and accurately in the time domain [7]. Applications where threshold rather than target-signature data is sufficient were also investigated, and for these applications it became clear that because of cost, the sampling oscilloscope had to be replaced by a stable and fast-acting threshold device. To meet this requirement, two different types of tunnel-diode receivers were developed. The successful developmemt of these receivers, together with the design of inexpensive microwave delay-line ranging techniques, led to the evolution of BAseband Radar (BAR) or free-space time-domain reflectometry. BAR devices have been designed and recently demonstrated for various applications, including auto precollision sensing, spaceship docking, airport surface-traffic control, auto braking, tanker-ship docking, harborcollision avoidance, etc. These sensing applications cover ranges from 5 to 5000 ft [8]. In other applications, the development of high-speed subnanosecond logic has impacted the computer field, making higher speed computation possible. Further developments resulted in the construction of a subnanosecond, single coaxial cable scheme for multiplexing data between computer terminals [9]. More recently, baseband-pulse techniques have been applied to the problem of developing a short-range wireless communication link. Here, the low EM pollution and covertness of operation potentially provide the means for wireless transmission without licensing. We review the research areas described above in more detail and refer the reader to references and a comprehensive biblography where sources for detailed information can be found [10].

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/proc.1978.10902

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 270

Metadata

Authors
Bennett, C. L., & Ross, G. F.
Venue
Proceedings of the IEEE
Published
1978
Volume
66
Issue
3
Pages
299-318
ISSN
0018-9219 (ISSN-L)
OpenAlex
W2138124245
Cited by
270
References
7
FWCI
4.66
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.