Structural material selection and processing for low Earth orbit spacecraft regarding atomic oxygen effects
Open accessThe DOI matches its Crossref record; 15 of the 18 references it cites were found in a registry or an index.
Abstract
The problem of structural material selection and surface processing for low Earth orbit (LEO) spacecraft is discussed. In order to limit this broad subject, discussion is focused especially on the "atomic oxygen effect", that is crucial for structures. Atomic oxygen (AO) constitutes the most severe impact on material degradation and erosion. However other environmental effects like space debris, outgassing, solar and cosmic radiation cannot be ignored. Two types of materials used for satellite structures are polymers and metals. Polymers suffer more than metals when exposed to AO, yet their outstanding properties make them popular in space applications. Polymers are preferable in the sense that they save weight due to their low densities and have better thermal insulation performance. Moreover, for electronics and optical equipment polymers are widely used. On the other hand, metallic materials are also prone to degradation, albeit less then polymers. Metals, certainly, could maintain the optimum structural integrity. Since designers do not sacrifice for the properties of polymers and metals, new techniques have been conducted to overcome the AO problem so that special surfaces have been constructed to serve as AO barriers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Insulating ceramic materials, including SiO 2 and Ge, fea- ture mass loss of 700 mg/m 2 and 50 mg/m 2 , respectively, for an atomic oxygen fluence of 6.4 × 10 25 atoms/m 2 [45].”
From Requirements for air-breathing electric propulsion in low-altitude orbits (2024) · doi:10.1007/s44205-024-00095-w · cites this paper as [45]
Citations
Cites
Spacecraft systems engineering
(1992) · Choice Reviews Online · doi:10.5860/choice.29-5681 · Cited by 338
A consideration of atomic oxygen interactions with the Space Station
Leger, L. J., & Visentine, J. T. (1986) · Journal of Spacecraft and Rockets · doi:10.2514/3.25837 · Cited by 159
Space Environmental Effects on Spacecraft: LEO Materials Selection Guide
Edward, M. S. (1995) · Progress Report · Cited by 99
Atomic oxygen effects measurements for shuttle missions STS-8 and 41-G
Visentine, J. T. (1988) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 88
STS-8 atomic oxygen effects experiment
Visentine, J. T., Leger, L. J., Kuminecz, J. F., & Spiker, I. K. (1985) · 23rd Aerospace Sciences Meeting · doi:10.2514/6.1985-415 · Cited by 77
Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces
Dooling, D., & Finckenor, M. (1999) · NASA Technical Reports Server (NASA) · Cited by 60
Low earth orbit atomic oxygen effects on surfaces
Leger, L. J., Visentine, J. T., & Kuminecz, J. F. (1984) · AIAA Aerospace Sciences Meeting · doi:10.2514/6.1984-548 · Cited by 59
Atomic Oxygen Effects on Spacecraft Materials
Banks, B. A., Miller, S. K., deGroh, K. K., & Demko, R. (2003) · NASA Technical Reports Server (NASA) · Cited by 35
Material interactions with the low earth orbital environment Accurate reaction rate measurements
Visentine, J. T., & Leger, L. J. (1985) · AIAA Shuttle Environment and Operations Conference · doi:10.2514/6.1985-7019 · Cited by 26
Evaluation of oxygen interaction with materials (EOIM) - STS-8 atomic oxygen effects
SMITH, K. (1985) · AIAA Shuttle Environment and Operations Conference · doi:10.2514/6.1985-7021 · Cited by 22
Research works printed but not linked: 7
- leger, 0, Oxygen Atom Reaction with Shuttle Materials at Orbital Altitutes - Data and Experiment Status, AIAA
- brinza, 0, Proc NASA Worshop on Atomic Oxygen Effects, 87
- whitaker, 1993, Atomic Oxygen Effects on LDEF Experiment AO 171, LDEF Second Post Retrieval Symposium, 1125
- banks, 1990, Atomic Oxygen, Proc LDEF Materials Data Analysis Workshop
- 1995, Analysis of Materials Flown on the Long Duration Exposure Facility Summary of Results of the Materials
- whitaker, 1983, LEO Atomic Oxygen Effects on Spacecraft Materials, AIAA Shuttle Environment and Operations Meeting
- gregory, 1994, LDEF Material Results for Spacecraft Applications, 193
Cited by
Materials selection for applications in space environment considering outgassing phenomenon
Fayazbakhsh, K., & Abedian, A. (2010) · Advances in Space Research · doi:10.1016/j.asr.2009.11.017 · Cited by 45
Oppenheimer, L., Ramkumar, M., Machado, I., Scott, C. E., Winroth, S., & Ishida, H. (2022) · Polymers · doi:10.3390/polym15010112 · Cited by 16
“While atomic-oxygen resistance is the primary concern for materials in low-Earth orbit, these materials must also be able to withstand debris and thermal cycling, while also being lightweight to be effective in spacecraft [37,38].”
BackgroundRequirements for air-breathing electric propulsion in low-altitude orbits
(2024) · doi:10.1007/s44205-024-00095-w · Cited by 15
“Insulating ceramic materials, including SiO 2 and Ge, feature mass loss of 700 mg/ m 2 and 50 mg/ m 2 , respectively, for an atomic oxygen fluence of 6.4 × 10 25 atoms/ m 2 [45].”
InfluentialOrtner, H. M., & Stadermann, F. J. (2009) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2009.05.009 · Cited by 13
Effects of Galactic Irradiation on Thermal and Electronic Transport in Tungsten
Ugwumadu, C. E., Drabold, D. A., & Tutchton, R. (2025) · physica status solidi (b) · doi:10.1002/pssb.202500109 · Cited by 8
“In space materials, W is used for components that need to withstand intense heat and mechanical stress, such as rocket engine nozzles, heat and radiation shields (for electronics and crew modules), gyroscope rotors, and inertial guidance system parts within spacecraft [3, 4, 5].”
Satellites-spacecraft materials and hypervelocity impact (HVI) testing: numerical simulations
Iliescu, L. E., Lakis, A. A., & Oulmane, A. (2016) · PolyPublie (École Polytechnique de Montréal) · Cited by 6
Atomic oxygen treatment effects on magnetron sputtered Zr–Ti binary films
Wang, W., Li, Z., Zhang, Z., Dong, S., & Liu, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.11.010 · Cited by 6
Structural Design and Analysis of a Very Low Earth Orbit Satellite Bus
Martins, S. C. D. (2025) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · doi:10.34626/evq0-b852 · Cited by 1
Iliescu, L. E. (2016) · PolyPublie (École Polytechnique de Montréal)
Metadata
- Authors
- Avcu, S., & Celik, B.
- Affiliations
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (TR)
- Venue
- International Conference on Recent Advances in Space Technologies, 2003. RAST '03. Proceedings of
- Publisher
- IEEE
- Published
- 2003
- Pages
- 589-594
- OpenAlex
- W2534968168
- Cited by
- 5
- References
- 18
- Citations by year
- 2024: 1 · 2022: 1 · 2014: 1
- FWCI
- 0.00
- Type
- conference paper
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- cc-by-nc-nd
- Locations
- International Conference on Recent Advances in Space Technologies (publishedVersion)
- OpenMETU (Middle East Technical University) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Silicone and Siloxane Chemistry
- Physical Sciences › Materials Science › General Materials Science › Material Properties and Applications
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- atomic oxygen, low Earth orbit spacecraft, structural material selection, surface processing, atomic oxygen erosion, material degradation, polymers, metals, space debris, outgassing, solar radiation, cosmic rays, satellite structures
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.