The DOI matches its Crossref record.
Design of a Passively-Powered, Programmable Sensing Platform for UHF RFID Systems
Abstract
This paper presents a wireless, battery-free, platform for sensing and computation that is powered and read by a standards compliant ultra-high frequency (UHF) radio frequency identification (RFID) reader. The WISP (wireless identification and sensing platform) includes a fully-programmable 16 bit microcontroller with analog-to-digital converter. The microcontroller firmware implements portions of the electronic product code (EPC) class 1 generation 1 protocol. When queried, the platform communicates arbitrary sensor data by emulating an EPC tag whose ID encodes the desired sensor data; the required 16-bit CRC is computed dynamically by the microcontroller. The RFID reader reports the received tag ID to application software which can interpret the information contained in the tag ID. The programmability of the WISP along with its implementation as a PCB allows for flexible integration of arbitrary low-power sensors. Furthermore, sensors are also exclusively powered from the RFID reader resulting in a completely battery free device. Sensors integrated into the WISP platform so far include light, temperature, and rectified voltage, and are shown experimentally to have an operating range of up to 4.5m. To the authors' knowledge, WISP is the first fully programmable computing platform that can operate using power transmitted from a long-range (UHF) RFID reader and communicate arbitrary, multi-bit data in a single response packet.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Power-Up SRAM State as an Identifying Fingerprint and Source of True Random Numbers
Holcomb, D. E., Burleson, W. P., & Fu, K. (2009) · IEEE Transactions on Computers · doi:10.1109/tc.2008.212 · Cited by 841
Pacemakers and Implantable Cardiac Defibrillators: Software Radio Attacks and Zero-Power Defenses
Halperin, D., Heydt-Benjamin, T. S., Ransford, B., Clark, S. S., Defend, B., Morgan, W., Fu, K., Kohno, T., & Maisel, W. H. (2008) · 2008 IEEE Symposium on Security and Privacy (sp 2008) · doi:10.1109/sp.2008.31 · Cited by 743
— Invited Paper — Backscatter Communication and RFID: Coding, Energy, and MIMO Analysis
Boyer, C., & Roy, S. (2014) · IEEE Transactions on Communications · doi:10.1109/tcomm.2013.120713.130417 · Cited by 391
Green IoT: An Investigation on Energy Saving Practices for 2020 and Beyond
Arshad, R., Zahoor, S., Shah, M. A., Wahid, A., & Yu, H. (2017) · IEEE Access · doi:10.1109/access.2017.2686092 · Cited by 372
“Although, the optimization of Active RFID was discussed in [12], advancement in passive RFID [42], Wireless Identification and Sensing Platform (WISP) [43] can lead to a more efficient and low power computation in the IoT.”
BackgroundIncreased Range Bistatic Scatter Radio
Kimionis, J., Bletsas, A., & Sahalos, J. N. (2014) · IEEE Transactions on Communications · doi:10.1109/tcomm.2014.020314.130559 · Cited by 346
Metadata
- Authors
- Sample, A. P., Yeager, D. J., Powledge, P. S., & Smith, J. R.
- Venue
- 2007 IEEE International Conference on RFID
- Publisher
- IEEE
- Published
- 2007
- Pages
- 149-156
- ISSN
- 2374-0221 (ISSN-L)
- OpenAlex
- W2126433409
- Cited by
- 227
- References
- 0
- FWCI
- 15.70
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of a Passively-Powered, Programmable Sensing Platform for UHF RFID Systems. https://app.cochat.ai/papers/10.1109/rfid.2007.346163
- The paper
- Sample, A. P., Yeager, D. J., Powledge, P. S., & Smith, J. R. (2007). Design of a Passively-Powered, Programmable Sensing Platform for UHF RFID Systems. 2007 IEEE International Conference on RFID. https://doi.org/10.1109/rfid.2007.346163
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.