The DOI matches its Crossref record.
Every smart phone is a backscatter reader: Modulated backscatter compatibility with Bluetooth 4.0 Low Energy (BLE) devices
Abstract
In this work, we show how modulated backscatter signals can be crafted to yield channelized band-pass signals akin to those transmitted by many conventional wireless devices. As a result, conventional wireless devices can receive these backscattered signals without any modification (neither hardware nor software) to the conventional wireless device. We present a proof of concept using the Bluetooth 4.0 Low Energy, or BLE, standard widely available on smart phones and mobile devices. Our prototype backscatter tag produces three-channel bandpass frequency shift keying (FSK) packets at 1 Mbps that are indistinguishable from conventional BLE advertising packets. An unmodified Apple iPad is shown to correctly receive and display these packets at a range of over 9.4 m using its existing iOS Bluetooth stack with no changes whatsoever. We create all three BLE channels by backscattering a single incident CW carrier using a novel combination of fundamentalmode and harmonic-mode backscatter subcarrier modulation, with two of the band-pass channels generated by the fundamental mode and one of the band-pass channels generated by the second harmonic mode. The backscatter modulator consumes only 28.4 pJ/bit, compared with over 10 nJ/bit for conventional BLE transmitters. The backscatter approach yields over 100X lower energy per bit than a conventional BLE transmitter, while retaining compatibility with billions of existing Bluetooth enabled smartphones and mobile devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ambient Backscatter Communications: A Contemporary Survey
Van Huynh, N., Hoang, D. T., Lu, X., Niyato, D., Wang, P., & Kim, D. I. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2841964 · Cited by 932
LoRa Backscatter: Enabling The Vision of Ubiquitous Connectivity
Talla, V., Hessar, M., Kellogg, B., Najafi, A., Smith, J. R., & Gollakota, S. (2017) · Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies · doi:10.1145/3130970 · Cited by 443
Symbiotic Radio: A New Communication Paradigm for Passive Internet of Things
Long, R., Liang, Y.-C., Guo, H., Yang, G., & Zhang, R. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2019.2954678 · Cited by 392
Inter-Technology Backscatter: Towards Internet Connectivity for Implanted Devices
Iyer, V., Talla, V., Kellogg, B., Gollakota, S., & Smith, J. (2016) · Proceedings of the 2016 ACM SIGCOMM Conference · doi:10.1145/2934872.2934894 · Cited by 367
HitchHike: Practical Backscatter Using Commodity WiFi
Zhang, P., Bharadia, D., Joshi, K., & Katti, S. (2016) · Proceedings of the 14th ACM Conference on Embedded Network Sensor Systems CD-ROM · doi:10.1145/2994551.2994565 · Cited by 342
Metadata
- Authors
- Ensworth, J. F., & Reynolds, M. S.
- Venue
- 2015 IEEE International Conference on RFID (RFID)
- Publisher
- IEEE
- Published
- 2015-04
- Pages
- 78-85
- ISSN
- 2374-0221 (ISSN-L)
- OpenAlex
- W2146976683
- Cited by
- 179
- References
- 0
- FWCI
- 22.35
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Every smart phone is a backscatter reader: Modulated backscatter compatibility with Bluetooth 4.0 Low Energy (BLE) devices. https://app.cochat.ai/papers/10.1109/rfid.2015.7113076
- The paper
- Ensworth, J. F., & Reynolds, M. S. (2015). Every smart phone is a backscatter reader: Modulated backscatter compatibility with Bluetooth 4.0 Low Energy (BLE) devices. 2015 IEEE International Conference on RFID (RFID). https://doi.org/10.1109/rfid.2015.7113076
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.