The DOI matches its Crossref record.
Generic slung load transportation system using small size helicopters
Abstract
In this paper we present an overview of techniques and approaches used for a load transportation system based on small size unmanned helicopters. The focus is on the control approach and on the movement of the rope connecting helicopters and load. The proposed approach is based on two control loops: an outer loop to control the translation of each helicopter in compound and an inner loop to control the orientation of helicopters. The challenge here is that in both loops the dynamics of the whole system - all helicopters and load - should be accounted for. It is shown, that for designing the outer loop controller a complex model of the helicopters and load can be replaced by a simplified model based on interconnected mass points. For designing the inner loop controller, the complete dynamics of the whole system are considered. The usage of force sensors in the ropes is proposed in order to simplify the inner loop controller and to make it robust against variations of system parameters. The presented inner loop controller is independent of the number of coupled helicopters. The outer loop controller depends on the number of helicopters. The problem of oscillations in the flexible ropes due to external disturbancies (e.g. wind gusts) is discussed and a solution based on load state observer is presented. The performance of the presented system was verified in simulations and in real flight experiments with one and three helicopters transporting the load. The worldwide first demonstration of a slung load transportation using three helicopters was performed in December 2007.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Survey on Unmanned Aerial Vehicle Networks for Civil Applications: A Communications Viewpoint
Hayat, S., Yanmaz, E., & Muzaffar, R. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2016.2560343 · Cited by 1,386
Survey of advances in guidance, navigation, and control of unmanned rotorcraft systems
Kendoul, F. (2012) · Journal of Field Robotics · doi:10.1002/rob.20414 · Cited by 663
Kim, J., Kim, S., Ju, C., & Son, H. I. (2019) · IEEE Access · doi:10.1109/access.2019.2932119 · Cited by 612
Multi-UAV Cooperation and Control for Load Transportation and Deployment
Maza, I., Kondak, K., Bernard, M., & Ollero, A. (2010) · Journal of Intelligent and Robotic Systems · doi:10.1007/s10846-009-9352-8 · Cited by 288
Self-citationIntrospective Perception for Long-Term Aerial Telemanipulation With Virtual Reality
Lee, J., Balachandran, R., Kondak, K., Coelho, A., Stefano, M. D., Humt, M., Feng, J., Asfour, T., & Triebel, R. (2024) · IEEE Transactions on Field Robotics · doi:10.55417/fr.2023010 · Cited by 8
“Examples of aerial manipulation applications range from load transportation (Bernard and Kondak, 2009), contact based inspection and maintenance in chemical plants (Trujillo et al., 2019), bridges (Sanchez-Cuevas et al., 2019), power-line maintenance (Cacace et al., 2021), to sensor installations…”
Self-citation
Metadata
- Authors
- Bernard, M., & Kondak, K.
- Venue
- 2009 IEEE International Conference on Robotics and Automation
- Publisher
- IEEE
- Published
- 2009-05
- Pages
- 3258-3264
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2172041073
- Cited by
- 201
- References
- 0
- FWCI
- 15.67
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.