The DOI matches its Crossref record.
Simultaneous Transmission and Reception for Improvedwireless Network Performance
Abstract
One of the limiting factors in ad hoc wireless mesh networks using traditional physical layer techniques is the inability to transmit and receive at the same frequency simultaneously. As a consequence, careful time-slot or frequency-reuse planning is required. This has adverse network data-rate and latency implications. The focus of this paper is a demonstration of signal processing techniques that enable simultaneous transmission and reception. These techniques employ informed-transmittermultiple-input multiple-output (MIMO) links. A combination of adaptive transmit and receive antenna array approaches is exploited. A number of important types of networking limitations can be resolved given simultaneous transmit and receive technology. The first example is the simultaneous link problem. By employing transmit and receive spatial adaptivity, two links can operate in close proximity using the same frequency at the same time. Another example is the full duplex relay node. Using the same frequency for both links, a given node can simultaneously receive packets from one node while forwarding them to another. For practical systems, two issues dominate performance: channel estimation error, often caused by stale estimates of the channel at the transmitter, and dynamic range limitations of the transmitter and receiver. These issues are investigated. Theoretical, simulated, and experimental results are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
In-Band Full-Duplex Wireless: Challenges and Opportunities
Sabharwal, A., Schniter, P., Guo, D., Bliss, D. W., Rangarajan, S., & Wichman, R. (2014) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2014.2330193 · Cited by 2,290
Self-citationBharadia, D., McMilin, E., & Katti, S. (2013) · Proceedings of the ACM SIGCOMM 2013 conference on SIGCOMM · doi:10.1145/2486001.2486033 · Cited by 1,817
Practical, real-time, full duplex wireless
Jain, M., Choi, J. I., Kim, T., Bharadia, D., Seth, S., Srinivasan, K., Levis, P., Katti, S., & Sinha, P. (2011) · Proceedings of the 17th annual international conference on Mobile computing and networking · doi:10.1145/2030613.2030647 · Cited by 1,367
Full-duplex wireless communications using off-the-shelf radios: Feasibility and first results
Duarte, M., & Sabharwal, A. (2010) · 2010 Conference Record of the Forty Fourth Asilomar Conference on Signals, Systems and Computers · doi:10.1109/acssc.2010.5757799 · Cited by 878
Applications of self-interference cancellation in 5G and beyond
Hong, S., Brand, J., Choi, J., Jain, M., Mehlman, J., Katti, S., & Levis, P. (2014) · IEEE Communications Magazine · doi:10.1109/mcom.2014.6736751 · Cited by 758
Bharadia, D., McMilin, E., & Katti, S. (2013) · ACM SIGCOMM Computer Communication Review · doi:10.1145/2534169.2486033 · Cited by 643
In-band full-duplex technology: Techniques and systems survey
Kolodziej, K. E., Perry, B. T., & Herd, J. S. (2019) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2019.2896561 · Cited by 640
“These techniques have been presented for both omnidirectional [56]–[58] and directional [59], [60] applications as well as unspecified conditions [61], [62].”
MethodFull-Duplex Wireless Communications: Challenges, Solutions, and Future Research Directions
Zhang, Z., Long, K., Vasilakos, A. V., & Hanzo, L. (2016) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2497203 · Cited by 620
A Survey of In-Band Full-Duplex Transmission: From the Perspective of PHY and MAC Layers
Kim, D., Lee, H., & Hong, D. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2403614 · Cited by 603
In-Band Full-Duplex Relaying: A Survey, Research Issues and Challenges
Liu, G., Yu, F. R., Ji, H., Leung, V. C. M., & Li, X. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2394324 · Cited by 532
Design and Characterization of a Full-Duplex Multiantenna System for WiFi Networks
Duarte, M., Sabharwal, A., Aggarwal, V., Jana, R., Ramakrishnan, K. K., Rice, C. W., & Shankaranarayanan, N. K. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2284712 · Cited by 532
Multipair Full-Duplex Relaying With Massive Arrays and Linear Processing
Ngo, H. Q., Suraweera, H. A., Matthaiou, M., & Larsson, E. G. (2014) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2014.2330091 · Cited by 398
Pushing the limits of Full-duplex: Design and Real-time Implementation
Sahai, A., Patel, G., & Sabharwal, A. (2011) · arXiv (Cornell University) · doi:10.48550/arxiv.1107.0607 · Cited by 296
Low-Complexity End-to-End Performance Optimization in MIMO Full-Duplex Relay Systems
Suraweera, H. A., Krikidis, I., Zheng, G., Yuen, C., & Smith, P. J. (2014) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2013.122313.130608 · Cited by 269
Metadata
- Authors
- Bliss, D. W., Parker, P. A., & Margetts, A. R.
- Venue
- 2007 IEEE/SP 14th Workshop on Statistical Signal Processing
- Publisher
- IEEE
- Published
- 2007-08
- Pages
- 478-482
- OpenAlex
- W2139550871
- Cited by
- 226
- References
- 0
- FWCI
- 7.05
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.