The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Adaptive linear controller for robotic manipulators
Abstract
This paper presents a new approach to the position and velocity control of a manipulator by using an adaptive controller of the self-tuning type for each joint. The complicated manipulator system is modeled by a set of time series difference equations. The parameters of the models are determined by on-line recursive algorithms, which result from minimizing the sum of the squared equation errors. The adaptive controller of each joint is designed on the basis of the difference equation model and a chosen performance criterion. The controller gains are calculated on-line using the model with the estimated values of system parameters. Simulation results are presented to demonstrate the applicability of the approach. Some aspects of the implementation are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Approach to Manipulator Control: The Cerebellar Model Articulation Controller (CMAC)
Albus, J. S. (1975) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3426922 · Cited by 2,177
Resolved Motion Rate Control of Manipulators and Human Prostheses
Whitney, D. (1969) · IEEE Transactions on Man Machine Systems · doi:10.1109/tmms.1969.299896 · Cited by 1,599
Force Feedback Control of Manipulator Fine Motions
Whitney, D. E. (1977) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.3427095 · Cited by 720
Modelling, Trajectory Calculation and Servoing of a Computer Controlled Arm
Paul, R. (1972) · Defense Technical Information Center (DTIC) · doi:10.21236/ad0785071 · Cited by 362
An Approximation Theory of Optimal Control for Trainable Manipulators
Saridis, G. N., & Lee, C.-S. G. (1979) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1979.4310171 · Cited by 348
Cited by
Dynamic sensor-based control of robots with visual feedback
Weiss, L., Sanderson, A., & Neuman, C. (1987) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1987.1087115 · Cited by 830
Theory and applications of neural networks for industrial control systems
Fukuda, T., & Shibata, T. (1992) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.170966 · Cited by 391
Application of a General Learning Algorithm to the Control of Robotic Manipulators
Miller, W. T., Glanz, F. H., & Kraft, L. G. (1987) · The International Journal of Robotics Research · doi:10.1177/027836498700600207 · Cited by 373
Miller, W. T., Hewes, R. P., Glanz, F. H., & Kraft, L. G. (1990) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.88112 · Cited by 318
Sensor-based control of robotic manipulators using a general learning algorithm
Miller, W. (1987) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1987.1087081 · Cited by 310
Metadata
- Authors
- Koivo, A., & Guo, T.-H.
- Venue
- IEEE Transactions on Automatic Control
- Published
- 1983-02
- Volume
- 28
- Issue
- 2
- Pages
- 162-171
- ISSN
- 0018-9286 (ISSN-L)
- OpenAlex
- W2132560048
- Cited by
- 331
- References
- 5
- FWCI
- 61.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.