The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Adaptive Fault-Tolerant Control of Nonlinear Uncertain Systems: An Information-Based Diagnostic Approach
Abstract
This paper presents a unified methodology for detecting, isolating and accommodating faults in a class of nonlinear dynamic systems. A fault diagnosis component is used for fault detection and isolation. On the basis of the fault information obtained by the fault-diagnosis procedure, a fault-tolerant control component is designed to compensate for the effects of faults. In the presence of a fault, a nominal controller guarantees the boundedness of all the system signals until the fault is detected. Then the controller is reconfigured after fault detection and also after fault isolation, to improve the control performance by using the fault information generated by the diagnosis module. Under certain assumptions, the stability of the closed-loop system is rigorously investigated. It is shown that the system signals remain bounded and the output tracking error converges to a neighborhood of zero.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nonlinear and adaptive control design
Krstić, M., Kokotović, P. V., & Kanellakopoulos, I. (1995) · Cited by 10,421
Ioannou, P., & Sun, J. (1995) · Medical Entomology and Zoology · doi:10.1109/acc.1984.4171550 · Cited by 5,663
Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The International Series on Asian Studies in Computer and Information Science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,262
Narendra, K. S., & Annaswamy, A. M. (1989) · Cited by 3,988
Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy
Frank, P. M. (1990) · Automatica · doi:10.1016/0005-1098(90)90018-d · Cited by 3,545
Passino, K. M., & Yurkovich, S. (1997) · Cited by 2,074
Fault Detection and Diagnosis in Engineering Systems
Gertler, J. J. (2017) · CRC Press eBooks · doi:10.1201/9780203756126 · Cited by 1,999
Systematic design of adaptive controllers for feedback linearizable systems
Kanellakopoulos, I., Kokotovic, P. V., & Morse, A. S. (1991) · IEEE Transactions on Automatic Control · doi:10.1109/9.100933 · Cited by 1,958
Fault detection and diagnosis in engineering systems
Thomas, P. (2002) · Control Engineering Practice · doi:10.1016/s0967-0661(02)00064-3 · Cited by 1,171
Handbook of Intelligent Control: Neural, Fuzzy, and Adaptive Approaches
White, D. A., & Sofge, D. (1992) · Medical Entomology and Zoology · Cited by 705
Stable adaptive tracking of uncertain systems using nonlinearly parametrized on-line approximators
Polycarpou, M. M., & Mears, M. J. (1998) · International Journal of Control · doi:10.1080/002071798222280 · Cited by 435
Self-citationFault-tolerant drive-by-wire systems
(2002) · IEEE Control Systems · doi:10.1109/mcs.2002.1035218 · Cited by 387
Clark, R. N. (1978) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.1978.308607 · Cited by 295
Detection, estimation, and accommodation of loss of control effectiveness
Eva Wu, N., Zhang, Y., & Zhou, K. (2000) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/1099-1115(200011)14:7<775::aid-acs621>3.0.co;2-4 · Cited by 258
Detecting Instrument Malfunctions in Control Systems
Clark, R. N., Fosth, D. C., & Walton, V. (1975) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.1975.308108 · Cited by 237
Åström, K., Albertos, P., Blanke, M., Isidori, A., Schaufelberger, W., & Sanz, R. (2001) · Springer eBooks · doi:10.1007/978-1-4471-0349-3 · Cited by 219
Polycarpou, M. M. (2001) · IEEE Transactions on Automatic Control · doi:10.1109/9.920792 · Cited by 199
Self-citationStable fault-tolerant adaptive fuzzy/neural control for a turbine engine
Diao, Y., & Passino, K. M. (2001) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.918902 · Cited by 174
Design of fault diagnosis filters and fault-tolerant control for a class of nonlinear systems
Kabore, R., & Wang, H. (2001) · IEEE Transactions on Automatic Control · doi:10.1109/9.964696 · Cited by 172
Using learning techniques to accommodate unanticipated faults
Farrell, J. A., Berger, T., & Appleby, B. D. (1993) · IEEE Control Systems · doi:10.1109/37.214943 · Cited by 84
Cited by
Review on cyber-physical systems
Liu, Y., Peng, Y., Wang, B., Yao, S., & Liu, Z. (2017) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2017.7510349 · Cited by 508
Van, M., Ge, S. S., & Ren, H. (2017) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2016.2555307 · Cited by 486
Li, Y.-X. (2019) · Automatica · doi:10.1016/j.automatica.2019.04.022 · Cited by 454
Tang, X., Tao, G., & Joshi, S. M. (2007) · Automatica · doi:10.1016/j.automatica.2007.03.019 · Cited by 398
Zhang, X., Polycarpou, M. M., & Parisini, T. (2010) · Automatica · doi:10.1016/j.automatica.2009.11.014 · Cited by 346
Self-citation
Metadata
- Authors
- Zhang, X., Parisini, T., & Polycarpou, M. M.
- Venue
- IEEE Transactions on Automatic Control
- Published
- 2004-08
- Volume
- 49
- Issue
- 8
- Pages
- 1259-1274
- ISSN
- 0018-9286 (ISSN-L)
- OpenAlex
- W2127801773
- Cited by
- 543
- References
- 20
- FWCI
- 43.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.