Nonlinear MPC for Tracking Piece-Wise Constant Reference Signals
Open accessThe DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
This paper presents a novel tracking predictive controller for constrained nonlinear systems capable to deal with sudden and large variations of a piece-wise constant setpoint signal. The uncertain nature of the setpoint may lead to stability and feasibility issues if a regulation predictive controller based on the stabilizing terminal constraint is used. The tracking model predictive controller presented in this paper extends the MPC for tracking for constrained linear systems to the more complex case of constrained nonlinear systems. The key idea is the addition of an artificial reference as a new decision variable. The considered cost function penalizes the deviation of the predicted trajectory with respect to the artificial reference as well as the distance between the artificial reference and the setpoint. Closed-loop stability and recursive feasibility for any setpoint are guaranteed, thanks to an appropriate terminal cost and extended stabilizing terminal constraint. Also, two simplified formulations are shown: the design based on a terminal equality constraint and the design without terminal constraint. The resulting controller ensures recursive feasibility for any changing setpoint. In the case of unreachable setpoints, asymptotic stability of the optimal reachable setpoint is also proved. The properties of the controller have been tested on a constrained continuous stirred tank reactor simulation model and have been experimentally validated on a four-tanks plant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Boyd, S., & Vandenberghe, L. (2004) · doi:10.1017/cbo9780511804441 · Cited by 56,601
Constrained model predictive control: Stability and optimality
Mayne, D. Q., Rawlings, J. B., Rao, C. V., & Scokaert, P. O. M. (2000) · Automatica · doi:10.1016/s0005-1098(99)00214-9 · Cited by 8,736
Model predictive control: Theory and practice—A survey
García, C. E., Prett, D. M., & Morari, M. (1989) · Automatica · doi:10.1016/0005-1098(89)90002-2 · Cited by 5,284
Linear and nonlinear programming.
(1986) · Mathematics and Computers in Simulation · doi:10.1016/0378-4754(86)90092-3 · Cited by 4,805
Lee, J. H., Kaisare, N. S., & García, C. E. (2007) · Springer eBooks · doi:10.1002/9781394333325.fmatter · Cited by 3,766
Model predictive control: Recent developments and future promise
Mayne, D. Q. (2014) · Automatica · doi:10.1016/j.automatica.2014.10.128 · Cited by 1,975 · cited 3×
“Asymptotic stability of the setpoint and constraints satisfaction of the closed loop can be guaranteed by designing the terminal cost function and the terminal constraint in such a way that they satisfy certain conditions in a neighborhood of the setpoint [25], [27], [28].”
BackgroundCorriou, J.-P. (2004) · Process Control · doi:10.1007/978-1-4471-3848-8_16 · Cited by 1,271
The quadruple-tank process: a multivariable laboratory process with an adjustable zero
Johansson, K. H. (2000) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.845876 · Cited by 1,104 · cited 2×
“The four-tanks plant [18] is a multivariable laboratory plant of interconnected tanks with nonlinear dynamics and subject to state and input constraints.”
BackgroundMethod(2013) · Dynamic Modelling and Predictive Control in Solid Oxide Fuel Cells: First Principle and Data‐Based Approaches · doi:10.1002/9781118501054.ch6 · Cited by 1,047
Reference governor for constrained nonlinear systems
Bemporad, A. (1998) · IEEE Transactions on Automatic Control · doi:10.1109/9.661611 · Cited by 552 · cited 1×
“This is a standard tracking control problem and it is also present in the design of other controllers such as the command governors [2], [3], [8], [9].”
Background
Cited by
Model Predictive Control of Power Electronic Systems: Methods, Results, and Challenges
Karamanakos, P., Liegmann, E., Geyer, T., & Kennel, R. (2020) · IEEE Open Journal of Industry Applications · doi:10.1109/ojia.2020.3020184 · Cited by 491
Linear Tracking MPC for Nonlinear Systems—Part II: The Data-Driven Case
Berberich, J., Kohler, J., Muller, M. A., & Allgower, F. (2022) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2022.3166851 · Cited by 185
“Assumption 2 is a standard condition in tracking MPC (cf. [44, Lemma 1.8], [22, Remark 1]) and it implies the 1 Input setpoints can be included via an augmented output y (cid:48) = . existence of an affine (hence Lipschitz continuous) map ˆ g which uniquely maps output equilibria y s to their…”
BackgroundMethodInfluentialIncremental Model Predictive Control Exploiting Time-Delay Estimation for a Robot Manipulator
Wang, Y., Leibold, M., Lee, J., Ye, W., Xie, J., & Buss, M. (2022) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2022.3142629 · Cited by 52
Metadata
- Authors
- Limon, D., Ferramosca, A., Alvarado, I., & Alamo, T.
- Venue
- IEEE Transactions on Automatic Control
- Published
- 2018-11
- Volume
- 63
- Issue
- 11
- Pages
- 3735-3750
- ISSN
- 0018-9286 (ISSN-L)
- 1558-2523
- 2334-3303
- OpenAlex
- W2792285312
- Cited by
- 201
- References
- 25
- FWCI
- 8.69
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.