The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
3-D Printed Millimeter-Wave and Terahertz Lenses with Fixed and Frequency Scanned Beam
Abstract
High-gain and beam-scanning antennas are extremely important in the applications of millimeter-wave (MMW) and terahertz (THz) technologies. Dielectric lens is a suitable candidate for this purpose, because it has no metal and quite small feeding loss. In this paper, discrete dielectric lenses are studied in which periodic antireflection (AR) structures are added to reduce impedance mismatch at the air-dielectric interfaces, leading to higher directivity. Meanwhile, a multifrequency phase matching method is proposed to realize a beam-scanning lens in both MMW and THz regions. The design concept of the beam-scanning lens is applicable to other frequency ranges as well, which opens new opportunities for future lens design. Moreover, three-dimensional (3-D) printing technology is employed to simplify the manufacturing process and reduce the cost. Experiments are done in both MMW and THz regions, and the results verify the concept of lens design. The 3-D printed MMW and THz lenses with fixed and scanning beams demonstrated in this work could be an important step toward MMW and THz communications, radar, and imaging systems for practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THz imaging and sensing for security applications—explosives, weapons and drugs
Federici, J. F., Schulkin, B., Huang, F., Gary, D., Barat, R., Oliveira, F., & Zimdars, D. (2005) · Semiconductor Science and Technology · doi:10.1088/0268-1242/20/7/018 · Cited by 1,756
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Performing optical logic operations by a diffractive neural network
Qian, C., Lin, X., Lin, X., Xu, J., Sun, Y., Li, E., Zhang, B., & Chen, H. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0303-2 · Cited by 413
3D Printing Antennas for 5G and Millimeter Wave 6G Applications
Li, S., Njogu, P., Izquierdo, B. S., Gao, S., & Chen, Z. (2022) · 2022 IEEE 33rd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc54779.2022.9978007 · Cited by 11
Metadata
- Authors
- Yi, H., Qu, S.-W., Ng, K.-B., Chan, C. H., & Bai, X.
- Venue
- IEEE Transactions on Antennas and Propagation
- Published
- 2016-02
- Volume
- 64
- Issue
- 2
- Pages
- 442-449
- ISSN
- 0018-926X (ISSN-L)
- 1558-2221
- OpenAlex
- W2285554365
- Cited by
- 228
- References
- 1
- FWCI
- 14.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3-D Printed Millimeter-Wave and Terahertz Lenses with Fixed and Frequency Scanned Beam. https://app.cochat.ai/papers/10.1109/tap.2015.2505703
- The paper
- Yi, H., Qu, S.-W., Ng, K.-B., Chan, C. H., & Bai, X. (2016). 3-D Printed Millimeter-Wave and Terahertz Lenses with Fixed and Frequency Scanned Beam. IEEE Transactions on Antennas and Propagation. https://doi.org/10.1109/tap.2015.2505703
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.