CoChat

Advanced Fabrication Processes for Superconducting Very Large Scale Integrated Circuits

Open access
Tolpygo, Sergey, Bolkhovsky, Vladimir, Weir, Terence, Wynn, Alex, Oates, Daniel, Johnson, Leonard, Gouker, Mark · 2016 · IEEE Transactions on Applied Superconductivity
Cited by 252

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Abstract

We review the salient features of two advanced nodes of an 8-Nb-layer fully planarized process developed recently at MIT Lincoln Laboratory for fabricating single flux quantum (SFQ) digital circuits with very large-scale integration on 200-mm wafers: the SFQ4ee and SFQ5ee nodes, where “ee” denotes that the process is tuned for energy-efficient SFQ circuits. The former has eight superconducting layers with 0.5-μm minimum feature size and a 2-Ω/sq Mo layer for circuit resistors. The latter has nine superconducting layers: eight Nb wiring layers with the minimum feature size of 350 nm and a thin superconducting MoNxlayer (Tc~ 7.5 K) with high kinetic inductance (about 8 pH/sq) for forming compact inductors. A nonsuperconducting (Tcxlayer with lower nitrogen content is used for 6-Ω/sq planar resistors for shunting and biasing of Josephson junctions (JJs). Another resistive layer is added to form interlayer sandwich-type resistors of milliohm range for releasing unwanted flux quanta from superconducting loops of logic cells. Both process nodes use Au/Pt/Ti contact metallization for chip packaging. The technology utilizes one layer of Nb/AlOx-Al/Nb JJs with critical current density Jcof 100 μA/μm2and minimum diameter of 700 nm. Circuit patterns are defined by 248-nm photolithography and high-density plasma etching. All circuit layers are fully planarized using chemical mechanical planarization of SiO2interlayer dielectric. The following results and topics are presented and discussed: the effect of surface topography under the JJs on the their properties and repeatability, Icand Jctargeting, effect of hydrogen dissolved in Nb, MoNxproperties for the resistor layer and for high-kinetic-inductance layer, and technology of milliohm-range resistors.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/tasc.2016.2519388

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 252

Metadata

Authors
Tolpygo, S., Bolkhovsky, V., Weir, T., Wynn, A., Oates, D., Johnson, L., & Gouker, M.
Venue
IEEE Transactions on Applied Superconductivity
Published
2016
Pages
1-1
ISSN
  • 1051-8223 (ISSN-L)
  • 1558-2515
OpenAlex
W2206019357
Cited by
252
References
13
FWCI
9.60
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.