An Online Tool Temperature Monitoring Method Based on Physics-Guided Infrared Image Features and Artificial Neural Network for Dry Cutting
The DOI matches its Crossref record; 30 of the 31 references it cites were found in a registry or an index.
Abstract
This paper presents an efficient method, which reconstructs the temperature field around the tool/chip interface from infrared (IR) thermal images, for online monitoring the internal peak temperature of the cutting tool. The tool temperature field is divided into two regions; namely, a far field for solving the heat-transfer coefficient between the tool and ambient temperature, and a near field where an artificial neural network (ANN) is trained to account for the unknown heat variations at the frictional contact interface. Methods to extract physics-based feature points from the IR image as ANN inputs are discussed. The effects of image resolution, feature selection, chip occlusion, contact heat variation, and measurement noises on the estimated contact temperature are analyzed numerically and experimentally. The proposed method has been verified by comparing the ANN-estimated surface temperatures against “true values” experimentally obtained using a high-resolution IR imager on a custom-designed testbed as well as numerically simulated using finite-element analysis. The concept feasibility of the temperature monitoring method is demonstrated on an industrial lathe-turning center with a commercial tool insert.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An Algorithm for Least-Squares Estimation of Nonlinear Parameters
Marquardt, D. W. (1963) · Journal of the Society for Industrial and Applied Mathematics · doi:10.1137/0111030 · Cited by 30,728
Infrared thermography for condition monitoring – A review
Bagavathiappan, S., Lahiri, B. B., Saravanan, T., Philip, J., & Jayakumar, T. (2013) · Infrared Physics & Technology · doi:10.1016/j.infrared.2013.03.006 · Cited by 979
Abukhshim, N. A., Mativenga, P. T., & Sheikh, M. A. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.07.024 · Cited by 707
Vision-Based Online Process Control in Manufacturing Applications
Cheng, Y., & Jafari, M. A. (2008) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2007.912058 · Cited by 128
Applying neural networks to the solution of forward and inverse heat conduction problems
Deng, S., & Hwang, Y. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.06.009 · Cited by 127
Carvalho, S., Silva, S. M. M. D. L. E., Machado, Á. R., & Guimarães, G. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.03.086 · Cited by 114
Iqbal, S. A., Mativenga, P. T., & Sheikh, M. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1582-6 · Cited by 103
Infrared measurement of the temperature at the tool–chip interface while machining Ti–6Al–4V
Heigel, J. C., Whitenton, E. P., Lane, B. M., Donmez, M. A., Madhavan, V., & Moscoso-Kingsley, W. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.11.026 · Cited by 94
Arrazola, P. J., Aristimuño, P., Soler, D., & Childs, T. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.04.061 · Cited by 84
Analysis of thermal fields in orthogonal machining with infrared imaging
Dinc, C., Lazoğlu, İ., & Serpengüzel, A. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.07.002 · Cited by 81
Cited by
Pimenov, D. Y., Bustillo, A., Wojciechowski, S., Sharma, V. S., Gupta, M. K., & Kuntoğlu, M. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-01923-2 · Cited by 369
Ma, J., Xia, D., Wang, Y., Niu, X., Jiang, S., Liu, Z., & Guo, H. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.105150 · Cited by 146
Wu, P., He, Y., Li, Y., He, J., Liu, X., & Wang, Y. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.016 · Cited by 129
Elahi, E., Cui, W., Jha, S. K., & Zhang, H. (2019) · Energy · doi:10.1016/j.energy.2019.06.084 · Cited by 117
Application of physics-guided deep learning model in tool wear monitoring of high-speed milling
Li, S., Li, J., & Zhu, K. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111949 · Cited by 73
Metadata
- Authors
- Lee, K.-M., Huang, Y., Ji, J., & Lin, C.-Y.
- Affiliations
- Georgia Institute of Technology (US)
- Huazhong University of Science and Technology (CN)
- Venue
- IEEE Transactions on Automation Science and Engineering
- Published
- 2018-10
- Volume
- 15
- Issue
- 4
- Pages
- 1665-1676
- ISSN
- 1545-5955 (ISSN-L)
- 1558-3783
- OpenAlex
- W2802507231
- Cited by
- 28
- References
- 31
- Citations by year
- 2026: 3 · 2025: 1 · 2024: 3 · 2023: 5 · 2022: 6 · 2021: 5 · 2020: 3 · 2019: 2
- FWCI
- 1.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Automation Science and Engineering (publishedVersion)
- Funders
- National Natural Science Foundation of China (51505168)
- National Science Foundation (CMMI-1662700)
- National Basic Research Program of China (973 Program) (2013CB035803)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Physical Sciences › Engineering › Mechanics of Materials › Thermography and Photoacoustic Techniques
- Keywords
- infrared thermography, dry machining, tool-chip interface, contact heat transfer, frictional heating, artificial neural networks, online monitoring, image resolution effects, measurement noise, turning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Online Tool Temperature Monitoring Method Based on Physics-Guided Infrared Image Features and Artificial Neural Network for Dry Cutting. https://app.cochat.ai/papers/10.1109/tase.2018.2826362
- The paper
- Lee, K.-M., Huang, Y., Ji, J., & Lin, C.-Y. (2018). An Online Tool Temperature Monitoring Method Based on Physics-Guided Infrared Image Features and Artificial Neural Network for Dry Cutting. IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/tase.2018.2826362
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.