The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
An Overview of the ATSC 3.0 Physical Layer Specification
Open accessAbstract
This paper provides an overview of the physical layer specification of Advanced Television Systems Committee (ATSC) 3.0, the next-generation digital terrestrial broadcasting standard. ATSC 3.0 does not have any backwards-compatibility constraint with existing ATSC standards, and it uses orthogonal frequency division multiplexing-based waveforms along with powerful low-density parity check (LDPC) forward error correction codes similar to existing state-of-the-art. However, it introduces many new technological features such as 2-D non-uniform constellations, improved and ultra-robust LDPC codes, power-based layered division multiplexing to efficiently provide mobile and fixed services in the same radio frequency (RF) channel, as well as a novel frequency pre-distortion multiple-input single-output antenna scheme. ATSC 3.0 also allows bonding of two RF channels to increase the service peak data rate and to exploit inter-RF channel frequency diversity, and to employ dual-polarized multiple-input multiple-output antenna system. Furthermore, ATSC 3.0 provides great flexibility in terms of configuration parameters (e.g., 12 coding rates, 6 modulation orders, 16 pilot patterns, 12 guard intervals, and 2 time interleavers), and also a very flexible data multiplexing scheme using time, frequency, and power dimensions. As a consequence, ATSC 3.0 not only improves the spectral efficiency and robustness well beyond the first generation ATSC broadcast television standard, but also it is positioned to become the reference terrestrial broadcasting technology worldwide due to its unprecedented performance and flexibility. Another key aspect of ATSC 3.0 is its extensible signaling, which will allow including new technologies in the future without disrupting ATSC 3.0 services. This paper provides an overview of the physical layer technologies of ATSC 3.0, covering the ATSC A/321 standard that describes the so-called bootstrap, which is the universal entry point to an ATSC 3.0 signal, and the ATSC A/322 standard that describes the physical layer downlink signals after the bootstrap. A summary comparison between ATSC 3.0 and DVB-T2 is also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Layered-Division-Multiplexing: Theory and Practice
Zhang, L., Li, W., Wu, Y., Wang, X., Park, S.-I., Kim, H. M., Lee, J.-Y., Angueira, P., & Montalban, J. (2016) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2015.2505408 · Cited by 282
Low Complexity Layered Division Multiplexing for ATSC 3.0
Park, S.-I., Lee, J.-Y., MYOUNG, S.-S., et al. (2015) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2015.2492459 · Cited by 149
Low-Density Parity-Check Codes for ATSC 3.0
Kim, K.-J., Myung, S., Park, S.-I., Lee, J.-Y., Kan, M., Shinohara, Y., Shin, J.-W., & Kim, J. (2016) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2016.2515538 · Cited by 142
Gómez‐Barquero, D., Vargas, D., Fuentes, M., Klenner, P., Moon, S., Choi, J.-Y., Schneider, D., & Murayama, K. (2016) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2015.2505399 · Cited by 95
Gómez‐Barquero, D., & Simeone, O. (2015) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2015.2459665 · Cited by 87
Cited by
Satellite Communications in the New Space Era: A Survey and Future Challenges
Kodheli, O., Lagunas, E., Maturo, N., Sharma, S. K., Shankar, B., Montoya, J. F. M., Duncan, J. C. M., Spano, D., Chatzinotas, S., Kisseleff, S., et al. (2021) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.3028247 · Cited by 1,524
5G Key Technologies for Smart Railways
Ai, B., Molisch, A. F., Rupp, M., & Zhong, Z.-D. (2020) · Proceedings of the IEEE · doi:10.1109/jproc.2020.2988595 · Cited by 357
Layered-Division-Multiplexing: Theory and Practice
Zhang, L., Li, W., Wu, Y., Wang, X., Park, S.-I., Kim, H. M., Lee, J.-Y., Angueira, P., & Montalban, J. (2016) · IEEE Transactions on Broadcasting · doi:10.1109/tbc.2015.2505408 · Cited by 282
Embracing non-orthogonalmultiple access in future wireless networks
Ding, Z.-G., Xu, M., Chen, Y., Peng, M.-G., & Poor, H. V. (2018) · Frontiers of Information Technology & Electronic Engineering · doi:10.1631/fitee.1800051 · Cited by 31
Metadata
- Authors
- Fay, L., Michael, L., Gomez-Barquero, D., Ammar, N., & Caldwell, M. W.
- Venue
- IEEE Transactions on Broadcasting
- Published
- 2016-03
- Volume
- 62
- Issue
- 1
- Pages
- 159-171
- ISSN
- 0018-9316 (ISSN-L)
- 1557-9611
- OpenAlex
- W2296131367
- Cited by
- 269
- References
- 5
- FWCI
- 47.55
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Overview of the ATSC 3.0 Physical Layer Specification. https://app.cochat.ai/papers/10.1109/tbc.2015.2505417
- The paper
- Fay, L., Michael, L., Gomez-Barquero, D., Ammar, N., & Caldwell, M. W. (2016). An Overview of the ATSC 3.0 Physical Layer Specification. IEEE Transactions on Broadcasting. https://doi.org/10.1109/tbc.2015.2505417
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.