Disturbance-Rejection High-Precision Motion Control of a Stewart Platform
The DOI matches its Crossref record.
Abstract
A simple robust autodisturbance rejection controller (ADRC) in linkspace is proposed to realize high precision tracking control of a general 6 degrees of freedom (DOF) Stewart platform in this paper. In practice, the performance of the controlled system is limited by how to select the high-quality differential signal in the presence of disturbances and measurement noise. Moreover, unmodeled nonlinear friction provides degradation on the motion precision. So, a nonlinear tracking differentiator in the feedforward path and an extended states observer in the feedback path are designed to obtain high quality differential signal and the real action component of unknown disturbance signals including nonlinear friction without a precise mathematical model. The nonlinear PD (proportional derivative) controller is used to synthesize the control action to give a superior performance. Extensive simulations and experimental results are presented to verify the effectiveness and ease of engineering implementation of the proposed method. The developed ADRC controller is simple and directly intuitive to the practitioners.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
From PID to Active Disturbance Rejection Control
Han, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011621 · Cited by 6,803
Active disturbance rejection control: a paradigm shift in feedback control system design
Gao, Z. (2006) · 2006 American Control Conference · doi:10.1109/acc.2006.1656579 · Cited by 953
Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
Liu, H., & Li, S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2162217 · Cited by 774
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Li, S., & Liu, Z. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024655 · Cited by 676
Su, Y. X., Zheng, C. H., & Duan, B. Y. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.847583 · Cited by 315
Self-citationActive Disturbance Rejection Control for MEMS Gyroscopes
Zheng, Q., Dong, L., Lee, D. H., & Gao, Z. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2008.2008638 · Cited by 292
On convergence of tracking differentiator
Guo, B.-Z., & Zhao, Z.-L. (2011) · International Journal of Control · doi:10.1080/00207179.2011.569954 · Cited by 289
On Validation of Extended State Observer Through Analysis and Experimentation
Zheng, Q., Gao, L. Q., & Gao, Z. (2012) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4005364 · Cited by 253
Metadata
- Authors
- Su, Y. X., Duan, B. Y., Zheng, C. H., Zhang, Y. F., Chen, G. D., & Mi, J. W.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2004-05
- Volume
- 12
- Issue
- 3
- Pages
- 364-374
- ISSN
- 1063-6536 (ISSN-L)
- OpenAlex
- W2100183878
- Cited by
- 209
- References
- 0
- FWCI
- 16.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.