The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Sensor Fault Detection, Isolation, and Estimation in Lithium-Ion Batteries
Abstract
In battery management systems (BMSs), real-time diagnosis of sensor faults is critical for ensuring the safety and reliability of the battery. For example, a current sensor fault leads to erroneous estimates of state of charge and other parameters, which in turn affects the control actions in the BMS. A temperature sensor fault may lead to ineffective thermal management. In this brief, a model-based diagnostic scheme is presented that uses sliding mode observers designed based on the electrical and thermal dynamics of the battery. It is analytically shown how the extraction of the equivalent output error injection signals on the sliding manifolds enables the detection, the isolation, as well as the estimation of the temperature, voltage, and current sensor faults. This brief includes simulation and experimental studies to demonstrate and evaluate the effectiveness of the proposed scheme. Discussions are also included on the effects of uncertainty and on threshold design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768
Cited by
Hu, X., Zhang, K., Liu, K., Lin, X., Dey, S., & Onori, S. (2020) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2020.2964814 · Cited by 580
Self-citationXiong, R., Sun, W., Yu, Q., & Sun, F. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115855 · Cited by 481
A Review of Lithium-Ion Battery Fault Diagnostic Algorithms: Current Progress and Future Challenges
Tran, M.-K., & Fowler, M. (2020) · Algorithms · doi:10.3390/a13030062 · Cited by 300
Hannan, M. A., Lipu, M. S. H., Hussain, A., Saad, M. H., & Ayob, A. (2018) · IEEE Access · doi:10.1109/access.2018.2797976 · Cited by 288
A Sensor Fault Diagnosis Method for a Lithium-Ion Battery Pack in Electric Vehicles
Xiong, R., Yu, Q., Shen, W., Lin, C., & Sun, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2893622 · Cited by 281
Metadata
- Authors
- Dey, S., Mohon, S., Pisu, P., & Ayalew, B.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2016-11
- Volume
- 24
- Issue
- 6
- Pages
- 2141-2149
- ISSN
- 1063-6536 (ISSN-L)
- 1558-0865
- OpenAlex
- W2316785399
- Cited by
- 169
- References
- 1
- FWCI
- 9.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sensor Fault Detection, Isolation, and Estimation in Lithium-Ion Batteries. https://app.cochat.ai/papers/10.1109/tcst.2016.2538200
- The paper
- Dey, S., Mohon, S., Pisu, P., & Ayalew, B. (2016). Sensor Fault Detection, Isolation, and Estimation in Lithium-Ion Batteries. IEEE Transactions on Control Systems Technology. https://doi.org/10.1109/tcst.2016.2538200
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.