The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Dead Time Compensation Method for Voltage-Fed PWM Inverter
Abstract
A new dead time compensation method for a pulsewidth modulation (PWM) inverter is proposed. In the PWM inverter, voltage distortion due to the dead time effects produces fifth and seventh harmonics in the phase currents of the stationary reference frame, and a sixth harmonic in thed- andq-axis currents of the synchronous reference frame, respectively. In this paper, the sixth harmonic of the integrator output of the synchronousd-axis proportional-integral (PI) current regulator is used to compensate the output voltage distortion due to the dead time effects, since the integrator output has ripple corresponding to six times the stator fundamental frequency. The proposed method can be easily implemented by feedforwardly adding compensation voltages to the output reference voltage of the synchronous PI current regulator. The proposed method, therefore, has some significant advantages such as simple implementation without additional hardware, easy mathematical computation, no offline experimental measurements, and application in both the steady state and the transient state. The validity of the proposed compensation algorithm is shown through several experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Inverter output voltage synthesis using novel dead time compensation
Choi, J.-W., & Sul, S.-K. (1996) · IEEE Transactions on Power Electronics · doi:10.1109/63.486169 · Cited by 509
Inverter Nonlinearity Effects in High-Frequency Signal-Injection-Based Sensorless Control Methods
Guerrero, J. M., Leetmaa, M., Briz, F., Zamarron, A., & Lorenz, R. D. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.844411 · Cited by 203
Diminution of Current-Measurement Error for Vector-Controlled AC Motor Drives
Jung, H.-S., Hwang, S.-H., Kim, J.-M., Kim, C.-U., & Choi, C. (2006) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.880904 · Cited by 130
Self-citation
Cited by
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
Yang, J., Chen, W.-H., Li, S., Guo, L., & Yan, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2583412 · Cited by 695
A Review of Sliding Mode Observer Based Sensorless Control Methods for PMSM Drive
Zuo, Y., Lai, C., & Iyer, K. L. V. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3287828 · Cited by 311
Current Control Methods for an Asymmetrical Six-Phase Induction Motor Drive
Che, H. S., Levi, E., Jones, M., Hew, W.-P., & Rahim, N. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2248170 · Cited by 280
Ding, X., Du, M., Duan, C., Guo, H., Xiong, R., Xu, J., Cheng, J., & Chi kwong Luk, P. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2765670 · Cited by 138
Metadata
- Authors
- Hwang, S.-H., & Kim, J.-M.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2010-03
- Volume
- 25
- Issue
- 1
- Pages
- 1-10
- ISSN
- 0885-8969 (ISSN-L)
- OpenAlex
- W2155645544
- Cited by
- 332
- References
- 3
- FWCI
- 9.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.