The DOI matches its Crossref record.
Reliability-Centered Maintenance for Wind Turbines Based on Statistical Analysis and Practical Experience
Open accessAbstract
The concept of reliability-centered maintenance (RCM) is applied to the two wind-turbine models Vestas V44-600 kW and V90-2MW. The executing RCM workgroup includes an owner and operator of the analyzed wind turbines, a maintenance service provider, a provider of condition-monitoring services, and wind-turbine component supplier as well as researchers at academia. Combining the results of failure statistics and assessment of expert judgement, the analysis is focused on the most critical subsystems with respect to failure frequencies and consequences: the gearbox, the generator, the electrical system, and the hydraulic system. This study provides the most relevant functional failures, reveals their causes and underlying mechanisms, and identifies remedial measures to prevent either the failure itself or critical secondary damage. This study forms the basis for the development of quantitative models for maintenance strategy selection and optimization, but may also provide a feedback of field experience for further improvement of wind-turbine design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges
Tchakoua, P., Wamkeue, R., Ouhrouche, M., Slaoui-Hasnaoui, F., Tameghe, T., & Ekemb, G. (2014) · Energies · doi:10.3390/en7042595 · Cited by 604
A review of wind turbine bearing condition monitoring: State of the art and challenges
de Azevedo, H. D. M., Araújo, A. M., & Bouchonneau, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.032 · Cited by 382
Design for reliability of power electronic systems
Wang, H., Ma, K., & Blaabjerg, F. (2012) · IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2012.6388833 · Cited by 313
From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry
Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., & Mrozek, D. (2023) · Sensors · doi:10.3390/s23135970 · Cited by 288
Simulation-driven machine learning: Bearing fault classification
Sobie, C., Freitas, C., & Nicolai, M. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.025 · Cited by 256
Igba, J., Alemzadeh, K., Durugbo, C., & Eiriksson, E. T. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.006 · Cited by 177
Afridi, Y. S., Ahmad, K., & Hassan, L. (2022) · International Journal of Energy Research · doi:10.1002/er.7100 · Cited by 140
Metadata
- Authors
- Fischer, K., Besnard, F., & Bertling, L.
- Venue
- IEEE Transactions on Energy Conversion
- Published
- 2012-03
- Volume
- 27
- Issue
- 1
- Pages
- 184-195
- ISSN
- 0885-8969 (ISSN-L)
- 1558-0059
- OpenAlex
- W2159577749
- Cited by
- 217
- References
- 0
- FWCI
- 38.48
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.