Complementary Switching in Oxide-Based Bipolar Resistive-Switching Random Memory
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Resistive-switching random access memory (RRAM) devices utilizing a crossbar architecture represent a promising alternative for Flash replacement in high-density data storage applications. However, RRAM crossbar arrays require the adoption of diodelike select devices with high on-off -current ratio and with sufficient endurance. To avoid the use of select devices, one should develop passive arrays where the nonlinear characteristic of the RRAM device itself provides self-selection during read and write. This paper discusses the complementary switching (CS) in hafnium oxide RRAM, where the logic bit can be encoded in two high-resistance levels, thus being immune from leakage currents and related sneak-through effects in the crossbar array. The CS physical mechanism is described through simulation results by an ion-migration model for bipolar switching. Results from pulsed-regime characterization are shown, demonstrating that CS can be operated at least in the 10-ns time scale. The minimization of the reset current is finally discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 1×
“Complementary switching (CS) was first implemented in two antiserially connected RRAM devices [12]–[14]”
BackgroundOrigin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches
Menzel, S., Waters, M., Marchewka, A., Böttger, U., Dittmann, R., & Waser, R. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101117 · Cited by 348 · cited 3×
“was previously obtained [20], [22], [25], [27].”
BackgroundResult
Cited by
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationIf it's pinched it's a memristor
Chua, L. (2014) · Semiconductor Science and Technology · doi:10.1088/0268-1242/29/10/104001 · Cited by 685
Comprehensive Physical Model of Dynamic Resistive Switching in an Oxide Memristor
Kim, S., Choi, S., & Lu, W. (2014) · ACS Nano · doi:10.1021/nn405827t · Cited by 463
Ambrogio, S., Balatti, S., Milo, V., Carboni, R., Wang, Z.-Q., Calderoni, A., Ramaswamy, N., & Ielmini, D. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2526647 · Cited by 256
Self-citationMemristive Crossbar Arrays for Storage and Computing Applications
Li, H., Wang, S., Zhang, X., Wang, W., Yang, R., Sun, Z., Feng, W., Lin, P., Wang, Z., Sun, L., et al. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202100017 · Cited by 205
Metadata
- Authors
- Nardi, F., Balatti, S., Larentis, S., Gilmer, D. C., & Ielmini, D.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-01
- Volume
- 60
- Issue
- 1
- Pages
- 70-77
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2062834822
- Cited by
- 116
- References
- 3
- FWCI
- 5.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Complementary Switching in Oxide-Based Bipolar Resistive-Switching Random Memory. https://app.cochat.ai/papers/10.1109/ted.2012.2226728
- The paper
- Nardi, F., Balatti, S., Larentis, S., Gilmer, D. C., & Ielmini, D. (2013). Complementary Switching in Oxide-Based Bipolar Resistive-Switching Random Memory. IEEE Transactions on Electron Devices. https://doi.org/10.1109/ted.2012.2226728
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.