The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Torque density improvement in a six-phase induction motor with third harmonic current injection
Abstract
The use of six-phase induction motor for industrial drives presents several advantages over the conventional three-phase drive such as improved reliability magnetic flux harmonic reduction, torque pulsations minimization, and reduction on the power ratings for the static converter. For these reasons, six-phase induction motors are beginning to be a widely acceptable alternative in high power applications. A typical construction of such drives includes an induction machine with a dual three-phase connection, where two three-phase groups are spatially shifted 30 electrical degrees, a six-leg inverter, and a control circuit. By controlling the machine's phase currents, harmonic elimination and torque-ripple reduction techniques could be implemented. This paper describes a technique of injecting third harmonic zero sequence current components in the phase currents, which greatly improves the machine torque density. Analytical, finite-element, and experimental results are presented to show the system operation and to demonstrate the improvement on the torque density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Disturbance-free operation of a multiphase current-regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (1994) · IEEE Transactions on Industry Applications · doi:10.1109/28.315238 · Cited by 372
Self-citationDisturbance free operation of a multiphase current regulated motor drive with an opened phase
Fu, J.-R., & Lipo, T. A. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.298884 · Cited by 318
Self-citation
Cited by
Multiphase Electric Machines for Variable-Speed Applications
Levi, E. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918488 · Cited by 2,157
Multiphase induction motor drives – a technology status review
Levi, E., Bojoi, R., Profumo, F., Toliyat, H. A., & Williamson, S. (2007) · IET Electric Power Applications · doi:10.1049/iet-epa:20060342 · Cited by 1,619
A Review on Multiphase Drives for Automotive Traction Applications
Salem, A., & Narimani, M. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2956355 · Cited by 311
Lin, F.-J., Hung, Y.-C., & Tsai, M.-T. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2238877 · Cited by 145
Metadata
- Authors
- Lyra, R. O. C., & Lipo, T. A.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2002-09
- Volume
- 38
- Issue
- 5
- Pages
- 1351-1360
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2154693424
- Cited by
- 310
- References
- 2
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.