The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Z-source inverter
Abstract
This paper presents an impedance-source (or impedance-fed) power converter (abbreviated as Z-source converter) and its control method for implementing DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. The Z-source converter employs a unique impedance network (or circuit) to couple the converter main circuit to the power source, thus providing unique features that cannot be obtained in the traditional voltage-source (or voltage-fed) and current-source (or current-fed) converters where a capacitor and inductor are used, respectively. The Z-source converter overcomes the conceptual and theoretical barriers and limitations of the traditional voltage-source converter (abbreviated as V-source converter) and current-source converter (abbreviated as I-source converter) and provides a novel power conversion concept. The Z-source concept can be applied to all DC-to-AC, AC-to-DC, AC-to-AC, and DC-to-DC power conversion. To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for DC-AC power conversion needed in fuel cell applications. Simulation and experimental results are presented to demonstrate the new features.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Modern Power Electronics And Ac Drives
Bose (2005) · Cited by 2,923
Rashid, R. (1988) · Cited by 2,662
(2025) · Understanding Electromagnetic Transients in Power Systems · doi:10.1002/9781394240586.ch6 · Cited by 587
Introduction to modern power electronics
Trzynadlowski, A. M. (1998) · Cited by 219
Cited by
Kouro, S., Leon, J. I., Vinnikov, D., & Franquelo, L. G. (2015) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2014.2376976 · Cited by 1,197
Anderson, J., & Peng, F. Z. (2008) · 2008 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2008.4592360 · Cited by 1,174
Self-citationImpedance-Source Networks for Electric Power Conversion Part I: A Topological Review
Siwakoti, Y. P., Peng, F. Z., Blaabjerg, F., Loh, P. C., & Town, G. E. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2313746 · Cited by 702
Self-citationReview of Three-Phase PWM AC–AC Converter Topologies
Kolar, J. W., Friedli, T., Rodriguez, J., & Wheeler, P. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2159353 · Cited by 575
Qian, W., Peng, F. Z., & Cha, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2122309 · Cited by 542
Self-citation
Metadata
- Authors
- Peng, F. Z.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2003-03
- Volume
- 39
- Issue
- 2
- Pages
- 504-510
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2150787442
- Cited by
- 3,228
- References
- 6
- FWCI
- 22.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.