Thermal Analysis of Multilevel Grid-Side Converters for 10-MW Wind Turbines Under Low-Voltage Ride Through
Open accessThe DOI matches its Crossref record.
Abstract
As the power level of a single wind turbine is continuously pushed up even to 7 MW, the wind power generation systems are required to be more reliable and able to withstand extreme grid disturbances. Moreover, it is becoming a need that the wind power generation system should be more active in the power network and able to contribute to the grid recovery by injecting reactive current during grid faults. Consequently, the full-scale power converter solutions are becoming more and more popular to fulfill the growing challenges in the wind power application. Nevertheless, the loading of the power devices in full-scale power converters, particularly during grid faults, may compromise the reliability performance and further increase the cost of the system. In this paper, three promising grid-side multilevel converter topologies for the next-generation 10-MW wind turbines are proposed and basically designed as case study. The operation status, as well as the reliability-related performances, is investigated aimed at various low-voltage ride through (LVRT) conditions. It is found that all of the proposed converter topologies will suffer from higher junction temperature in some heavily loaded power devices (particularly the diodes) under LVRT operation. Moreover, the three-level and five-level H-bridge topologies show more potential to reduce the inequality and level of device stress than the well-known three-level neutral point clamped topology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities
Wang, H., Liserre, M., & Blaabjerg, F. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2252958 · Cited by 916
Self-citationTransitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
“The thermal analysis of power converters, especially in case of more complex structures like multilevel or multi-cell ones, reveals that some of the power semiconductor devices can be more stressed with respect to others and this difference can be even more evident in some particular conditions like those caused by sy…”
BackgroundSelf-citationBana, P. R., Panda, K. P., Naayagi, R. T., Siano, P., & Panda, G. (2019) · IEEE Access · doi:10.1109/access.2019.2913447 · Cited by 361
Power electronics - the key technology for renewable energy system integration
Blaabjerg, F., Yang, Y., Ma, K., & Wang, X. (2015) · 2015 International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2015.7418680 · Cited by 148
Self-citationDong, Y., Yang, H., Li, W., & He, X. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2833019 · Cited by 39
Evaluation of Frequency and Temperature Dependence of Power Losses Difference in Parallel IGBTs
Yang, J., Che, Y., Ran, L., & Jiang, H. (2020) · IEEE Access · doi:10.1109/access.2020.2995971 · Cited by 23
“development of permanent magnet direct drive wind power generation technology, the number and quality of IGBT parallel connection required by machine side converter is higher and higher, so as tomeet the strict requirements of high efficiency and high reliability of wind power converter [9].”
Background
Metadata
- Authors
- Ma, K., Blaabjerg, F., & Liserre, M.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2013-03
- Volume
- 49
- Issue
- 2
- Pages
- 909-921
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2155777988
- Cited by
- 65
- References
- 0
- FWCI
- 6.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.