The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Regions of Active Damping Control for LCL Filters
Abstract
The control of a grid-connected voltage source inverter with an inductive-capacitive-inductive (LCL) filter is a very challenging task, since the LCL network causes a resonance phenomenon near to the control stability boundary. While many active damping methods have been proposed to overcome this issue, the role that pulse width modulation transport delay plays in the effectiveness of these strategies is still not fully resolved. This paper presents a theoretical discrete time-analysis framework that identifies three distinct regions of LCL filter resonance, namely, a high resonant frequency region where active damping is not required, a critical resonant frequency where a controller cannot stabilize the system, and a low resonant frequency region where active damping is essential. Suitable controllers are then proposed for the two stable regions, with gain calculations that allow for the greatest system bandwidth and damping. Simulation and experimental results verify the presented analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liserre, M., Teodorescu, R., & Blaabjerg, F. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.861185 · Cited by 1,101
Dannehl, J., Wessels, C., & Fuchs, F. W. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2008774 · Cited by 747
Cited by
Analysis and Stabilization of a Smart Transformer-Fed Grid
Zou, Z.-X., Buticchi, G., & Liserre, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733450 · Cited by 41
Metadata
- Authors
- Parker, S. G., McGrath, B. P., & Holmes, D. G.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2014-01
- Volume
- 50
- Issue
- 1
- Pages
- 424-432
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2078416002
- Cited by
- 624
- References
- 2
- FWCI
- 70.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Regions of Active Damping Control for LCL Filters. https://app.cochat.ai/papers/10.1109/tia.2013.2266892
- The paper
- Parker, S. G., McGrath, B. P., & Holmes, D. G. (2014). Regions of Active Damping Control for LCL Filters. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2013.2266892
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
