The DOI matches its Crossref record.
Electrical Propulsion System Design of Chevrolet Bolt Battery Electric Vehicle
Abstract
The propulsion system design of General Motors' Chevrolet Bolt battery electric vehicle (BEV) incorporates the use of a permanent magnet synchronous motor. Magnets are buried inside the rotor in double layer “V” arrangement and the rotor design optimizes the magnet placement between the adjacent poles asymmetrically to lower torque ripple and radial force. Rotor design also optimizes the placement of a pair of small slots stamped near the rotor outer surface at different locations in adjacent poles to provide further reduction in torque ripple and radial force. As a result of all these design features, the Chevrolet Bolt BEV electric motor is able to meet the GM stringent noise and vibration requirements without implementing rotor skew, which is known to lower the motor performance and add complexity to the rotor manufacturing. Similar to Chevrolet Spark BEV, a bar-wound stator construction known to provide high slot fill, shorter end-turn length, and other benefits is implemented in Chevrolet Bolt BEV. To lower the winding ac effect at higher speeds, the Chevrolet Bolt BEV motor implements six conductors per slot design while four conductors per slot design was used in the Chevrolet Spark motor design. As a result, individual conductor size is smaller in new design resulting in reduced winding ac effects and improved joule loss at high-speed operations. Chevrolet Bolt BEV stator design also adopts a special feature, introduced in Gen2 (2nd generation) Chevrolet Volt; the size and placement of stator slot openings under each pole are optimized to lower torque ripple and radial force. This feature acts as a supplement to the torque ripple and radial force reduction features introduced in the rotor design as described above.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles
Husain, I., Ozpineci, B., Islam, M. S., Gurpinar, E., Su, G.-J., Yu, W., Chowdhury, S., Xue, L., Rahman, D., & Sahu, R. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3046112 · Cited by 608
Wen, J., Zhao, D., & Zhang, C. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.09.055 · Cited by 422
Effects of High Ambient Temperature on Electric Vehicle Efficiency and Range: Case Study of Kuwait
Hamwi, H., Rushby, T., Mahdy, M., & Bahaj, A. S. (2022) · Energies · doi:10.3390/en15093178 · Cited by 39
Metadata
- Authors
- Momen, F., Rahman, K., & Son, Y.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2019-01
- Volume
- 55
- Issue
- 1
- Pages
- 376-384
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2890271082
- Cited by
- 206
- References
- 0
- FWCI
- 7.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrical Propulsion System Design of Chevrolet Bolt Battery Electric Vehicle. https://app.cochat.ai/papers/10.1109/tia.2018.2868280
- The paper
- Momen, F., Rahman, K., & Son, Y. (2019). Electrical Propulsion System Design of Chevrolet Bolt Battery Electric Vehicle. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2018.2868280
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.