An On-Board Model-Based Condition Monitoring for Lithium-Ion Batteries
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A model-based condition monitoring for lithium-ion (Li-ion) batteries involves estimating critical model parameters (e.g., capacity and impedance) and operational states [e.g., state of charge (SOC) and state of health]. This is important to design high-performance and safety-critical battery systems. Moreover, the tuning parameters of the condition monitoring algorithms significantly influence the performance of the algorithms. This paper proposes a real-time model-based condition monitoring for Li-ion batteries based on a real-time second-order resistor-capacitor electrical circuit battery model. The proposed method consists of an extended Kalman filter based online parameter identification and a smooth variable structure filter based state estimation. The two filters are systematically integrated to cooperate with each other and named hybrid filter (HF). Furthermore, a proposed particle swarm optimization based tuning parameter optimization is employed to find the optimal tuning parameters of the HF. The proposed method is compared with the dual extended Kalman filter (DEKF) via simulations and validated by experiments using a low-priced microcontroller. The results show that the proposed method can effectively choose the tuning parameters and has less computational complexity and higher accuracy of the SOC and capacity estimation than those of the conventional DEKF. Therefore, the proposed HF can be suitable for use in real-time embedded battery management system applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837 · cited 1×
“regarding the safety, reliability, and performance degradation of the Li-ion batteries [3].”
BackgroundA comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179 · cited 2×
“Therefore, electrical circuit models are more suitable for the real-time embedded system applications [10].”
BackgroundExtended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.033 · Cited by 1,768 · cited 9×
“The estimated SOC from the proposed algorithm matches that obtained from Coulomb counting better than those obtained from the DEKF.”
BackgroundMethodInfluential
Cited by
State-of-Charge Estimation of Li-Ion Battery in Electric Vehicles: A Deep Neural Network Approach
How, D. N. T., Hannan, M. A., Lipu, M. S. H., Sahari, K. S. M., Ker, P. J., & Muttaqi, K. M. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.3004294 · Cited by 337
“Typical algorithms found in the literature include Kalman filter [13], Luenberger observer [14],proportional–integralobserver[15],H (cid:2) observer[16],and sliding-mode observer [17].”
MethodHasib, S. A., Islam, S., Chakrabortty, R. K., Ryan, M. J., Saha, D. K., Ahamed, M. H., Moyeen, S. I., Das, S. K., Ali, M. F., Islam, M. R., et al. (2021) · IEEE Access · doi:10.1109/access.2021.3089032 · Cited by 272
Xia, Z., & Qahouq, J. A. A. (2021) · IEEE Access · doi:10.1109/access.2021.3092743 · Cited by 64
Cho, S., Han, D., Kim, J., & Kim, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111897 · Cited by 17
Kumar, D., Ahmed, M., Jamil, M., Rizwan, M., & Panwar, A. K. (2026) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3604739 · Cited by 3
Metadata
- Authors
- Kim, T., Adhikaree, A., Pandey, R., Kang, D.-W., Kim, M., Oh, C.-Y., & Baek, J.-W.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2019-03
- Volume
- 55
- Issue
- 2
- Pages
- 1835-1843
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2901418821
- Cited by
- 78
- References
- 3
- FWCI
- 4.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.