The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Comprehensive Study of a Hybrid Modulation Technique for the Neutral-Point-Clamped Converter
Abstract
This paper presents a hybrid modulation technique for the three-level neutral-point-clamped converter. A modulation strategy, based on two modulation signals per phase, was presented previously. This strategy completely removes the low-frequency voltage oscillations that appear at the neutral point (NP) in some operation conditions. However, it also has a major drawback: it significantly increases the switching losses of the converter. The proposal in this paper combines such a modulation strategy with sinusoidal pulsewidth modulation (SPWM). The main characteristic of this hybrid modulation is the reduction in switching losses at the cost of some low-frequency voltage oscillations at the NP. The amplitude of these oscillations can be controlled by varying the combination of the two strategies. The performance of the hybrid modulation is analyzed and compared with the original strategies. Power losses and oscillation amplitudes on the dc-link capacitors are evaluated. Experimental results show how the hybrid modulation performs by balancing the dc-link capacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilevel Converter for Traction Applications: Small-Scale Prototype Tests Results
Carpita, M., Marchesoni, M., Pellerin, M., & Moser, D. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918645 · Cited by 100 · cited 1×
“MULTILEVEL converters are widely used in high-power applications such as motor drives, utility applications, and, more recently, photovoltaic systems and wind generation [1]–[8].”
Background
Cited by
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872
Self-citationA Survey on Neutral-Point-Clamped Inverters
Rodriguez, J., Bernet, S., Steimer, P. K., & Lizama, I. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032430 · Cited by 1,813
Abu-Rub, H., Holtz, J., Rodriguez, J., & Baoming, G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043039 · Cited by 1,337
Pou, J., Zaragoza, J., Ceballos, S., Saeedifard, M., & Boroyevich, D. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2050783 · Cited by 430
Self-citationWang, C., & Li, Y. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024093 · Cited by 311
Metadata
- Authors
- Zaragoza, J., Pou, J., Ceballos, S., Robles, E., Ibanez, P., & Villate, J. L.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2009-02
- Volume
- 56
- Issue
- 2
- Pages
- 294-304
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2146864523
- Cited by
- 163
- References
- 1
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.