Implementation of a Fault-Diagnosis Algorithm for Induction Machines Based on Advanced Digital-Signal-Processing Techniques
The DOI matches its Crossref record.
Abstract
In this paper, a complete cross-correlation-based fault-diagnostic method is proposed for real-time digital-signal-processor (DSP) applications that cover both the fault-monitoring and decision-making stages. In practice, a motor driven by an inverter or utility line is run at various operating points where the frequency, amplitude, and phase of the fault signatures vary unexpectedly. These changes are considered to be one of the common factors that yield erroneous fault tracking and unstable fault detection. In this paper, the proposed algorithms deal with the ambiguities of line-current noise or sensor-resolution errors and operating-point-dependent threshold issues. It is theoretically and experimentally verified that a motor fault can be continuously tracked when the sensor errors are within a limited range through the adaptively determined threshold definition of noise conditions. The offline experiments are performed via Matlab using actual line-current data obtained by a data-acquisition system. These results are verified on a DSP-based motor drive in real time where drive sensors and a digital signal processor are employed both for motor-control and fault-diagnostic purposes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Data-based techniques focused on modern industry: An overview
Yin, S., Li, X., Gao, H., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2308133 · Cited by 1,025
Improved PLS Focused on Key-Performance-Indicator-Related Fault Diagnosis
Yin, S., Zhu, X., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345331 · Cited by 537
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Self-citationBurriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2647458 · Cited by 144
“This allows for computing diagnostic spectrograms on-line using low cost digital signal devices, such as DSPs or FPGAs.”
Background
Metadata
- Authors
- Choi, S., Akin, B., Rahimian, M. M., & Toliyat, H. A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2011-03
- Volume
- 58
- Issue
- 3
- Pages
- 937-948
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2111127432
- Cited by
- 108
- References
- 0
- FWCI
- 12.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Implementation of a Fault-Diagnosis Algorithm for Induction Machines Based on Advanced Digital-Signal-Processing Techniques. https://app.cochat.ai/papers/10.1109/tie.2010.2048837
- The paper
- Choi, S., Akin, B., Rahimian, M. M., & Toliyat, H. A. (2011). Implementation of a Fault-Diagnosis Algorithm for Induction Machines Based on Advanced Digital-Signal-Processing Techniques. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2010.2048837
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.