Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
The DOI matches its Crossref record.
Abstract
Eccentricity-related faults in induction motors have been studied extensively over the last few decades. They can exist in the form of static or dynamic eccentricity or both, in which case it is called a mixed eccentricity fault. These faults cause bearing damage, excessive vibration and noise, unbalanced magnetic pull, and under extreme conditions, stator-rotor rub which may seriously damage the motors. Since eccentricity faults are often associated with large induction machines, the repair or replacement costs arising out of such a scenario may easily run into tens and thousands of dollars. Previous research works have shown that it is extremely difficult to detect such faults if they appear individually, rather than in mixed form, unless the number of rotor bars and the pole-pair number conform to certain relationships. In this paper, it is shown that the terminal voltages of induction machines at switch-off reveal certain features that can lead to the detection of these faults in individual form, even in machines that do not show these signatures in line-current spectrum in steady state, or to the detection of the main contributory factor in case of mixed eccentricity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
“For instance, the STFT method allows determining signal frequency contents of local sections as the signal changes in time, which has been widely applied to detect both stator and rotor faults in inductor motors [160].”
MethodTrends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Motor Fault Diagnostics Based on Current Signatures: A Review
Niu, G., Dong, X., & Chen, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3285999 · Cited by 269
Methodology for fault detection in induction motors via sound and vibration signals
Delgado-Arredondo, P. A., Morinigo-Sotelo, D., Osornio-Rios, R. A., Avina-Cervantes, J. G., Rostro-Gonzalez, H., & Romero-Troncoso, R. D. J. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.06.032 · Cited by 266
Metadata
- Authors
- Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2011-05
- Volume
- 58
- Issue
- 5
- Pages
- 1673-1683
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2165337740
- Cited by
- 154
- References
- 0
- FWCI
- 18.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters. https://app.cochat.ai/papers/10.1109/tie.2010.2055772
- The paper
- Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2011). Detection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2010.2055772
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.