The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Detection and Isolation of Speed-, DC-Link Voltage-, and Current-Sensor Faults Based on an Adaptive Observer in Induction-Motor Drives
Abstract
A sensor fault detection and isolation unit is considered for induction-motor drives based on an adaptive observer with rotor-resistance estimation. Generally, closed-loop induction-motor drives with voltage-source inverters use a speed or position, a dc-link voltage, and two or three phase-current sensors. In the proposed fault-detection and isolation unit, the estimated phase currents and rotor resistance are sent to a decision-making unit, which identifies the faulty sensor type based on a deterministic rule base. In the case of a current-sensor failure, it also detects the phase with erroneous sensor output. It is shown that, unlike the other proposed model-based fault-tolerant systems, using a bank of observers is not necessary, and only one current observer with rotor-resistance estimation is sufficient for isolation of all sensors' faults. The accuracy of the proposed approach is analytically proved. Furthermore, extensive simulation and experimental tests verify the effectiveness of the proposed method at different operating conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Salmasi, F. R., Najafabadi, T. A., & Maralani, P. J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2038268 · Cited by 77 · cited 1×
“In [18], an observer with estimation of dc-link voltage and rotor resistance is proposed, which can be used for voltage-fault detection and reconfiguration.”
MethodSelf-citation
Cited by
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
A Review of Fault Detection and Diagnosis for the Traction System in High-Speed Trains
Chen, H., & Jiang, B. (2020) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2019.2897583 · Cited by 413
Foo, G. H. B., Zhang, X., & Vilathgamuwa, D. M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2244537 · Cited by 369
Jlassi, I., Estima, J. O., El Khil, S. K., Bellaaj, N. M., & Cardoso, A. J. M. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616398 · Cited by 284
“the motor phase currents in [46], and the faulty sensor localization uses a deterministic rule, which takes some electrical cycles, in practice.”
BackgroundWang, X., Wang, Z., Xu, Z., Cheng, M., Wang, W., & Hu, Y. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2876400 · Cited by 263
Metadata
- Authors
- Najafabadi, T. A., Salmasi, F. R., & Jabehdar-Maralani, P.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2011-05
- Volume
- 58
- Issue
- 5
- Pages
- 1662-1672
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2103112267
- Cited by
- 250
- References
- 1
- FWCI
- 6.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.