The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Boost Converter With Capacitor Multiplier and Coupled Inductor for AC Module Applications
Abstract
The grid-connected AC module is an alternative solution in photovoltaic (PV) generation systems. It combines a PV panel and a micro-inverter connected to grid. The use of a high step-up converter is essential for the grid-connected micro-inverter because the input voltage is about 15 V to 40 V for a single PV panel. The proposed converter employs a Zeta converter and a coupled inductor, without the extreme duty ratios and high turns ratios generally needed for the coupled inductor to achieve high step-up voltage conversion; the leakage-inductor energy of the coupled inductor is efficiently recycled to the load. These features improve the energy-conversion efficiency. The operating principles and steady-state analyses of continuous and boundary conduction modes, as well as the voltage and current stresses of the active components, are discussed in detail. A 25 V input voltage, 200 V output voltage, and 250 W output power prototype circuit of the proposed converter is implemented to verify the feasibility; the maximum efficiency is up to 97.3%, and full-load efficiency is 94.8%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Cited by
Nonisolated High Step-Up DC–DC Converters Adopting Switched-Capacitor Cell
Wu, G., Ruan, X., & Ye, Z. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327000 · Cited by 408
Metadata
- Authors
- Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-04
- Volume
- 60
- Issue
- 4
- Pages
- 1503-1511
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2150955962
- Cited by
- 190
- References
- 1
- FWCI
- 6.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.