Digital Adaptive Frequency Modulation for Bidirectional DC–DC Converter
The DOI matches its Crossref record.
Abstract
This paper introduces a digital adaptive control method for a bidirectional dc/dc charger/discharger, which is the core element for reliable and efficient energy storage systems. The proposed method achieves zero-voltage switching (ZVS) without the use of an auxiliary zero-crossing detection (ZCD) circuit. To satisfy ZVS conditions, proper switching frequency is determined through a digital calculation. It features soft switching over wide input and output ranges. Because this method does not require a ZCD circuit, it is easily implemented with bidirectional operation and reduces instability and noise susceptibility problems. To reduce conduction loss, a multiphase interleaving technique is applied. This interleaving method reduces the required capacitance by decreasing the current ripple. A phase shedding technique is also implemented to achieve higher efficiency over a wide load range. The operation of the proposed digital adaptive control method is analyzed. For experimental verification, a 200-W two-phase-interleaved bidirectional synchronous buck converter with 30-38-V bus voltage and 15-25-V battery voltage is implemented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Topologies and Control Schemes of Bidirectional DC–DC Power Converters: An Overview
Gorji, S. A., Sahebi, H. G., Ektesabi, M., & Rad, A. B. (2019) · IEEE Access · doi:10.1109/access.2019.2937239 · Cited by 439
Huang, X., Lee, F. C., Li, Q., & Du, W. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2476482 · Cited by 188
Liu, Y.-C., Chen, C., Chen, K.-D., Syu, Y.-L., & Dung, N. A. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2953117 · Cited by 61
Non-isolated bidirectional soft-switching SEPIC/ZETA converter with reduced ripple currents
Song, M.-S., Son, Y.-D., & Lee, K.-H. (2014) · Journal of Power Electronics · doi:10.6113/jpe.2014.14.4.649 · Cited by 56
Metadata
- Authors
- Baek, J.-B., Choi, W.-I., & Cho, B.-H.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-11
- Volume
- 60
- Issue
- 11
- Pages
- 5167-5176
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2059936846
- Cited by
- 109
- References
- 0
- FWCI
- 3.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.