The DOI matches its Crossref record.
Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines
Abstract
The aim of this paper is to present a diagnosis methodology for the detection of electrical faults in three-phase wound-rotor induction machines (WRIMs). In the considered application, the rotor windings are supplied by a static converter for the control of active and reactive power flows exchanged between the machine and the electrical grid. The proposed diagnosis approach is based on the use of wavelet analysis improved by a preprocessing of the rotor-voltage commands under time-varying conditions. Thus, the time evolution of fault components can be effectively analyzed. This paper proves also the importance of the fault components computed from rotor voltages in comparison to those coming from rotor currents under closed-loop operation. A periodical quantification of the fault, issued from the wavelet analysis, has been introduced for accurate stator- or rotor-fault detection. Simulation and experimental results show the validity of the proposed method, leading to an effective diagnosis procedure for both stator and rotor electrical faults in WRIMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
Data-based techniques focused on modern industry: An overview
Yin, S., Li, X., Gao, H., & Kaynak, O. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2308133 · Cited by 1,025
Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques
Henao, H., Capolino, G.-A., Fernandez-Cabanas, M., Filippetti, F., Bruzzese, C., Strangas, E., Pusca, R., Estima, J., Riera-Guasp, M., & Hedayati-Kia, S. (2014) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2287651 · Cited by 602
Self-citationThe state of the art of wind energy conversion systems and technologies: A review
Cheng, M., & Zhu, Y. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.08.037 · Cited by 600
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
Self-citationHeterogeneous Feature Models and Feature Selection Applied to Bearing Fault Diagnosis
Rauber, T. W., de Assis Boldt, F., & Varejao, F. M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2327589 · Cited by 365
Giantomassi, A., Ferracuti, F., Iarlori, S., Ippoliti, G., & Longhi, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2370936 · Cited by 168
“In literature, many works make use of signal transformation: a widely used technique is the wavelet transform (WT), which is applied to current, voltage, flux, and vibration signals [11].”
MethodNovel Diagnostic Techniques for Rotating Electrical Machines—A Review
Frosini, L. (2020) · Energies · doi:10.3390/en13195066 · Cited by 67
“As explained in [80], a rotor dissymmetry produces an inverse rotating magnetic field and an inverse sequence component in the rotor currents at frequency sfs.”
BackgroundDiagnosis of Mechanical Unbalance Fault in Permanent Magnet Synchronous Machine Drives
Zhang, J., Hang, J., & Cheng, M. (2016) · Electric Power Components and Systems · doi:10.1080/15325008.2016.1169463 · Cited by 23
Metadata
- Authors
- Gritli, Y., Zarri, L., Rossi, C., Filippetti, F., Capolino, G.-A., & Casadei, D.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-09
- Volume
- 60
- Issue
- 9
- Pages
- 4012-4024
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2022731643
- Cited by
- 193
- References
- 0
- FWCI
- 30.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.