The DOI matches its Crossref record; 86 of the 87 references it cites were found in a registry or an index.
Data-Based Techniques Focused on Modern Industry: An Overview
Abstract
This paper provides an overview of the recent developments in data-based techniques focused on modern industrial applications. As one of the hottest research topics for complicated processes, the data-based techniques have been rapidly developed over the past two decades and widely used in numerous industrial sectors nowadays. The core of data-based techniques is to take full advantage of the huge amounts of available process data, aiming to acquire the useful information within. Compared with the well-developed model-based approaches, data-based techniques provide efficient alternative solutions for different industrial issues under various operating conditions. The main objective of this paper is to review and summarize the recent achievements in data-based techniques, especially for complicated industrial applications, thus providing a referee for further study on the related topics both from academic and practical points of view. This paper begins with a brief evolutionary overview of data-based techniques in the last two decades. Then, the methodologies only based on process measurements and the model-data integrated techniques will be further introduced. The recent developments for modern industrial applications are, respectively, presented mainly from perspectives of monitoring and control. The new trends of data-based technique as well as potential application fields are finally discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, the advent of state-of-art technologies, such as the edge computing and the applications of GPU, helps cope with monitoring data stream effectively.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [315]
In the citing paper
“First, the healthy condition accounts for the majority of the longterm operation for machines, while faults seldom happen.Consequently, it is more easily to collect healthy data than faulty data.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [315]
In the citing paper
“Second, the quality of the collected data is not always satisfactory because some of them may suffer from the emergencies, such as the transmission interruption and the anomaly of measurement devices.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [315]
In the citing paper
“4) The prosperous development of sensor technologies and data transmission, especially with the advent of IoT and high-speed internet, promotes to collect a large number of data that contain the real-time information.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [315]
In the citing paper
“3) In order to collect sufficient health information of machines, there are many monitoring points on machines.Furthermore, multisource sensors are used to collect different kinds of data.The collected data are stored with various data structures.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [315]
Citations
Cites
Data-driven Soft Sensors in the process industry
Kadlec, P., Gabrys, B., & Strandt, S. (2009) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2008.12.012 · Cited by 1,845
Industrial Wireless Sensor Networks: Challenges, Design Principles, and Technical Approaches
Gungor, V. C., & Hancke, G. P. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015754 · Cited by 1,669
Iterative Learning Control: Brief Survey and Categorization
Ahn, H.-S., Chen, Y., & Moore, K. L. (2007) · IEEE Transactions on Systems, Man and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2007.905759 · Cited by 1,598
Megatrends: Ten new directions transforming our lives
(1983) · Business Horizons · doi:10.1016/0007-6813(83)90036-8 · Cited by 1,438
From model-based control to data-driven control: Survey, classification and perspective
Hou, Z.-S., & Wang, Z. (2013) · Information Sciences · doi:10.1016/j.ins.2012.07.014 · Cited by 1,405
Opportunities and Challenges of Wireless Sensor Networks in Smart Grid
Gungor, V. C., Lu, B., & Hancke, G. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2039455 · Cited by 1,368
A Novel Data-Driven Control Approach for a Class of Discrete-Time Nonlinear Systems
Hou, Z., & Jin, S. (2011) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2010.2093136 · Cited by 796
Survey on iterative learning control, repetitive control, and run-to-run control
Wang, Y., Gao, F., & Doyle, F. J. (2009) · Journal of Process Control · doi:10.1016/j.jprocont.2009.09.006 · Cited by 764
Data-Driven Model-Free Adaptive Control for a Class of MIMO Nonlinear Discrete-Time Systems
Hou, Z., & Jin, S. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2176141 · Cited by 685
Zhang, H., Cui, L., Zhang, X., & Luo, Y. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2168538 · Cited by 643
Kano, M., & Nakagawa, Y. (2008) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2007.07.005 · Cited by 508
A survey on iterative learning control for nonlinear systems
Xu, J.-X. (2011) · International Journal of Control · doi:10.1080/00207179.2011.574236 · Cited by 434
Dong, H., Wang, Z., & Gao, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213553 · Cited by 372
Self-citationGeometric properties of partial least squares for process monitoring
Li, G., Qin, S. J., & Zhou, D. (2010) · Automatica · doi:10.1016/j.automatica.2009.10.030 · Cited by 368
Fault Diagnosis in Industrial Induction Machines Through Discrete Wavelet Transform
Bouzida, A., Touhami, O., Ibtiouen, R., Belouchrani, A., Fadel, M., & Rezzoug, A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2095391 · Cited by 325
Subspace method aided data-driven design of fault detection and isolation systems
Ding, S. X., Zhang, P., Naik, A., Ding, E. L., & Huang, B. (2009) · Journal of Process Control · doi:10.1016/j.jprocont.2009.07.005 · Cited by 312
Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares
Zhang, Y., Zhou, H., Qin, S. J., & Chai, T. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2033181 · Cited by 283
Direct Nonlinear Control Design: The Virtual Reference Feedback Tuning (VRFT) Approach
Campi, M. C., & Savaresi, S. M. (2006) · IEEE Transactions on Automatic Control · doi:10.1109/tac.2005.861689 · Cited by 281
Data-driven monitoring for stochastic systems and its application on batch process
Yin, S., Ding, S. X., Abandan Sari, A. H., & Hao, H. (2013) · International Journal of Systems Science · doi:10.1080/00207721.2012.659708 · Cited by 266
Self-citationBiswal, B., Dash, P. K., & Panigrahi, B. K. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.928111 · Cited by 262
A PLS-Based Statistical Approach for Fault Detection and Isolation of Robotic Manipulators
Muradore, R., & Fiorini, P. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167110 · Cited by 221
Monitoring of wind farms’ power curves using machine learning techniques
Marvuglia, A., & Messineo, A. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.04.037 · Cited by 205
Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines
Gritli, Y., Zarri, L., Rossi, C., Filippetti, F., Capolino, G.-A., & Casadei, D. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236992 · Cited by 193
A Data-Driven Approach for Monitoring Blade Pitch Faults in Wind Turbines
Kusiak, A., & Verma, A. (2010) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2010.2066585 · Cited by 188
A Data-Driven Constrained Norm-Optimal Iterative Learning Control Framework for LTI Systems
Janssens, P., Pipeleers, G., & Swevers, J. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2185699 · Cited by 187
Fault detection based on Kernel Principal Component Analysis
Nguyen, V. H., & Golinval, J.-C. (2010) · Engineering Structures · doi:10.1016/j.engstruct.2010.08.012 · Cited by 178
Computer Communication Within Industrial Distributed Environment—a Survey
Gaj, P., Jasperneite, J., & Felser, M. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2209668 · Cited by 170
Yu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167893 · Cited by 167
Distributed $H_{\infty}$ Filtering for Polynomial Nonlinear Stochastic Systems in Sensor Networks
Shen, B., Wang, Z., Hung, Y. S., & Chesi, G. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2053339 · Cited by 161
Fault Diagnosis and Fault-Tolerant Control in Linear Drives Using the Kalman Filter
Huang, S., Tan, K. K., & Lee, T. H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2185011 · Cited by 152
Cascade Neural-Network-Based Fault Classifier for Three-Phase Induction Motor
Ghate, V. N., & Dudul, S. V. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2053337 · Cited by 149
Lee, G., Han, C., & Yoon, E. S. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049624u · Cited by 144
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
He, D., Li, R., & Zhu, J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2192894 · Cited by 143
Data‐Driven Adaptive Observer for Fault Diagnosis
Yin, S., Yang, X., & Karimi, H. R. (2012) · Mathematical Problems in Engineering · doi:10.1155/2012/832836 · Cited by 139
Self-citationData-driven optimal terminal iterative learning control
Chi, R., Wang, D., Hou, Z., & Jin, S. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.08.001 · Cited by 132
Cloud computing for industrial automation systems — A comprehensive overview
Givehchi, O., Trsek, H., & Jasperneite, J. (2013) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2013.6648080 · Cited by 129
Wang, D. (2011) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2010.2103401 · Cited by 123
Diagnosis of Three-Phase Electrical Machines Using Multidimensional Demodulation Techniques
Choqueuse, V., Benbouzid, M., Amirat, Y., & Turri, S. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2160138 · Cited by 122
Aggelogiannaki, E., & Sarimveis, H. (2007) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2007.05.002 · Cited by 118
Localized Fisher discriminant analysis based complex chemical process monitoring
Yu, J. (2010) · AIChE Journal · doi:10.1002/aic.12392 · Cited by 117
A Simple Real-Time Fault Signature Monitoring Tool for Motor-Drive-Embedded Fault Diagnosis Systems
Akin, B., Choi, S., Orguner, U., & Toliyat, H. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051936 · Cited by 113
Virtual Reference Feedback Tuning for non-minimum phase plants
Campestrini, L., Eckhard, D., GEVERS, M. R., & Bazanella, A. S. (2011) · Automatica · doi:10.1016/j.automatica.2011.04.002 · Cited by 112
Choi, S., Akin, B., Rahimian, M. M., & Toliyat, H. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048837 · Cited by 108
On-line batch process monitoring using batch dynamic kernel principal component analysis
Jia, M., Chu, F., Wang, F., & Wang, W. (2010) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2010.02.004 · Cited by 106
Data-driven predictive control for networked control systems
Xia, Y., Xie, W. H., Liu, B., & Wang, X. (2012) · Information Sciences · doi:10.1016/j.ins.2012.01.047 · Cited by 103
Cloud-Based Networked Visual Servo Control
Wu, H., Lou, L., Chen, C., Hirche, S., & Kühnlenz, K. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2186775 · Cited by 94
Data-driven communication for state estimation with sensor networks
Battistelli, G., Benavoli, A., & Chisci, L. (2012) · Automatica · doi:10.1016/j.automatica.2012.02.028 · Cited by 92
Fault detection of non-Gaussian processes based on modified independent component analysis
Zhang, Y., & Zhang, Y. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.05.010 · Cited by 89
Ding, S. X., Yang, G., Zhang, P., Ding, E. L., Jeinsch, T., Weinhold, N., & Schultalbers, M. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2009.2018451 · Cited by 87
He, D., Chen, C., Chan, S., Bu, J., & Yang, L. T. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2218562 · Cited by 78
Complex process quality prediction using modified kernel partial least squares
Zhang, Y., Teng, Y., & Zhang, Y. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.12.010 · Cited by 77
Subspace aided data-driven design of robust fault detection and isolation systems
Wang, Y., Ma, G., Ding, S. X., & Li, C. (2011) · Automatica · doi:10.1016/j.automatica.2011.05.028 · Cited by 75
Data Driven Adaptive Predictive Control for Holonomic Constrained Under-Actuated Biped Robots
Ge, S. S., Li, Z., & Yang, H. (2011) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2011.2145378 · Cited by 72
Improving convergence of Iterative Feedback Tuning
Huusom, J. K., Poulsen, N. K., & Jørgensen, S. B. (2008) · Journal of Process Control · doi:10.1016/j.jprocont.2008.09.004 · Cited by 66
Nonlinear Bioprocess Monitoring Using Multiway Kernel Localized Fisher Discriminant Analysis
Yu, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1017282 · Cited by 66
A Data-Driven ${\cal H}_{2}$-Optimal Control Approach for Adaptive Optics
Hinnen, K. J. G., Verhaegen, M., & Doelman, N. J. (2008) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2007.903374 · Cited by 65
Anticipatory Control of Wind Turbines With Data-Driven Predictive Models
Kusiak, A., Song, Z., & Zheng, H. (2009) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2025320 · Cited by 62
Hsu, C.-C., Chen, M., & Chen, L. (2010) · Computers & Industrial Engineering · doi:10.1016/j.cie.2010.03.011 · Cited by 60
Optimal input design for direct data-driven tuning of model-reference controllers
Formentin, S., Karimi, A., & Savaresi, S. M. (2013) · Automatica · doi:10.1016/j.automatica.2013.02.054 · Cited by 60
Data-Based Virtual Unmodeled Dynamics Driven Multivariable Nonlinear Adaptive Switching Control
Chai, T., Zhang, Y., Wang, H., Su, C., & Sun, J. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2167685 · Cited by 59
Variable-weighted Fisher discriminant analysis for process fault diagnosis
He, X. B., Wang, W., Yang, Y. P., & Yang, Y. H. (2009) · Journal of Process Control · doi:10.1016/j.jprocont.2008.12.001 · Cited by 58
Improved kernel fisher discriminant analysis for fault diagnosis
Li, J., & Cui, P. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.11.043 · Cited by 56
Juang, C.-F., & Chen, G. (2012) · IEEE transactions on industrial electronics (1982. Print) · doi:10.1109/tie.2011.2159949 · Cited by 54
Zumoffen, D., & BASUALDO, M. S. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071064m · Cited by 54
Passivity criteria for continuous-time neural networks with mixed time-varying delays
Li, H., Lam, J., & Cheung, K. C. (2012) · Applied Mathematics and Computation · doi:10.1016/j.amc.2012.05.002 · Cited by 54
Intelligent ICA–SVM fault detector for non-Gaussian multivariate process monitoring
Hsu, C.-C., Chen, M., & Chen, L. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.09.053 · Cited by 52
Data-Driven Control for Relative Degree Systems via Iterative Learning
Meng, D., Jia, Y., Du, J., & Yu, F. (2011) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2011.2174378 · Cited by 52
Principal Component Imagery for the Quality Monitoring of Dynamic Laser Welding Processes
Jager, M., & Hamprecht, F. A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2008339 · Cited by 52
Application of iterative feedback tuning (IFT) to speed and position control of a servo drive
Kissling, S., Blanc, P., Myszkorowski, P., & Vaclavik, I. (2009) · Control Engineering Practice · doi:10.1016/j.conengprac.2009.02.005 · Cited by 50
Adaptive Power Control for Wireless Networks Using Multiple Controllers and Switching
Paul, A., Akar, M., Safonov, M. G., & Mitra, U. (2005) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2005.853420 · Cited by 49
Recursive identification algorithms to design fault detection systems
Naik, A. S., Yin, S., Ding, S. X., & Zhang, P. (2010) · Journal of Process Control · doi:10.1016/j.jprocont.2010.06.018 · Cited by 48
Self-citationIterative Tuning of Internal Model Controllers With Application to Air/Fuel Ratio Control
Rupp, D., & Guzzella, L. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2008.2010458 · Cited by 47
Data-driven latent-variable model-based predictive control for continuous processes
Lauri, D., Rossiter, J. A., Sanchis, J., & Martínez, M. A. (2010) · Journal of Process Control · doi:10.1016/j.jprocont.2010.08.002 · Cited by 46
Data-driven adaptive model-based predictive control with application in wastewater systems
Wahab, N. A., Katebi, R. M., Balderud, J., & Rahmat, M. F. (2011) · IET Control Theory and Applications · doi:10.1049/iet-cta.2010.0068 · Cited by 45
Global data-driven modeling of wind turbines in the presence of turbulence
van der Veen, G. J., van Wingerden, J., Fleming, P., Scholbrock, A. K., & Verhaegen, M. (2013) · Control Engineering Practice · doi:10.1016/j.conengprac.2012.12.008 · Cited by 42
Simultaneous process mean and variance monitoring using artificial neural networks
Guh, R. (2010) · Computers & Industrial Engineering · doi:10.1016/j.cie.2010.02.004 · Cited by 36
Yu, Y., Xu, Y., Li, X., & Chen, C. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2106096 · Cited by 32
Self-citationFault Diagnosis for Power System Transmission Line Based on PCA and SVMs
Guo, Y., Li, K., & Liu, X. A. (2013) · Communications in computer and information science · doi:10.1007/978-3-642-37105-9_58 · Cited by 28
Automatic controller tuning via unfalsified control
Wonghong, T., & Engell, S. (2012) · Journal of Process Control · doi:10.1016/j.jprocont.2012.08.002 · Cited by 25
Data driven design of fault diagnosis systems
Yin, S. (2012) · Cited by 25
Self-citationData-Driven Design of Observers and Its Applications
Ding, S. X., Yin, S., Wang, Y., Wang, Y., Yang, Y., & Ni, B. (2011) · IFAC Proceedings Volumes · doi:10.3182/20110828-6-it-1002.00891 · Cited by 19
Self-citationLocal Models for data-driven learning of control policies for complex systems
Macciò, D., & Cervellera, C. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.05.063 · Cited by 15
Sensitivity Compensating Control: Data-driven model based adaptive approach
Rani, K. Y. (2011) · Journal of Process Control · doi:10.1016/j.jprocont.2011.07.010 · Cited by 14
Stability of networked control system with dynamic quantizer and data‐driven zero‐order hold
Konaka, E. (2011) · Electronics and Communications in Japan · doi:10.1002/ecj.10329 · Cited by 6
Dong, N., Wu, A., & Chen, Z. (2013) · Nonlinear Dynamics · doi:10.1007/s11071-013-0760-8 · Cited by 5
An approach to data-driven design of feedback control systems with embedded residual generation
Ding, S. X., Wang, Y., & Yang, Y. Z. (2011) · doi:10.1109/cdc.2011.6160771 · Cited by 2
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks
Zhao, R., Wang, D., Yan, R., Mao, K., Shen, F., & Wang, J. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733438 · Cited by 877
How, D. N. T., Hannan, M. A., Hossain Lipu, M. S., & Ker, P. J. (2019) · IEEE Access · doi:10.1109/access.2019.2942213 · Cited by 812
Deep Model Based Domain Adaptation for Fault Diagnosis
Lu, W., Liang, B., Cheng, Y., Meng, D., Yang, J., & Zhang, T. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2627020 · Cited by 761
Metadata
- Authors
- Yin, S., Li, X., Gao, H., & Kaynak, O.
- Affiliations
- Harbin Institute of Technology (CN)
- King Abdulaziz University (SA)
- Boğaziçi University (TR)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-01
- Volume
- 62
- Issue
- 1
- Pages
- 657-667
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1984672166
- Cited by
- 1,025
- References
- 87
- Citations by year
- 2026: 49 · 2025: 37 · 2024: 62 · 2023: 50 · 2022: 59 · 2021: 54 · 2020: 105 · 2019: 102 · 2018: 90 · 2017: 91 · 2016: 157 · 2015: 131
- FWCI
- 154.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Funders
- National Natural Science Foundation of China (61304102)
- China Postdoctoral Science Foundation (2012M520738)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Control Systems and Identification
- Physical Sciences › Engineering › Control and Systems Engineering › Advanced Control Systems Optimization
- Keywords
- industrial process monitoring, industrial process control, process data, model-data integration, process measurement, complex industrial processes, data-driven control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.