The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems
Abstract
This paper presents a compendious summary of power hardware-in-the-loop (PHIL) simulations that are used for designing, analyzing, and testing of electrical power system components. PHIL simulations are an advanced application of real-time simulations that represent novel methods, which conjoin software and hardware testing. This contribution outlines necessary requirements for the implementation of PHIL simulations, which are defined by the nature of the digital real-time simulator, the power amplifier, and the power interface (PI). Fundamental characteristics, such as the input/output systems, PI, interface algorithm, and system stability considerations, are discussed for PHIL setups, in order to illustrate both flexibility and complexity of this compound simulation method. The objective of this work is to elaborate an understandable overview of PHIL simulation for electrical power systems and to constitute a contemporary state-of-the-art status of this research area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sastry, S. (1999) · Interdisciplinary Applied Mathematics · doi:10.1007/978-1-4757-3108-8 · Cited by 1,764
Digital Computer Solution of Electromagnetic Transients in Single-and Multiphase Networks
Dommel, H. W. (1969) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1969.292459 · Cited by 1,716
Li, W., Joos, G., & Belanger, J. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037103 · Cited by 448
Ren, W., Steurer, M., & Baldwin, T. L. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.926240 · Cited by 341
A Megawatt-Scale Power Hardware-in-the-Loop Simulation Setup for Motor Drives
Steurer, M., Edrington, C. S., Sloderbeck, M., Ren, W., & Langston, J. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036639 · Cited by 213
Self-citationde la Fuente, D. V., Rodríguez, C. L. T., Garcerá, G., Figueres, E., & Gonzalez, R. O. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196011 · Cited by 148
Andrén, F., Bletterie, B., Kadam, S., Kotsampopoulos, P. C., & Bucher, C. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345347 · Cited by 102
Real time simulation of a power system with VSG hardware in the loop
Karapanos, V., de Haan, S. W. H., & Zwetsloot, K. (2011) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2011.6119919 · Cited by 102
Stabilization of Power Hardware-in-the-Loop simulations of electric energy systems
Viehweider, A., Lauss, G. F., & Lehfuß, F. (2011) · Simulation Modelling Practice and Theory · doi:10.1016/j.simpat.2011.04.001 · Cited by 102
Self-citationComparison of multiple power amplification types for power Hardware-in-the-Loop applications
Lehfuß, F., Lauss, G. F., Kotsampopoulos, P. C., Hatziargyriou, N. D., Crolla, P., & Roscoe, A. (2012) · Complexity in Engineering (COMPENG) · doi:10.1109/compeng.2012.6242959 · Cited by 84
Self-citation
Cited by
Jayawardana, I., Ho, C. N. M., & Zhang, Y. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3093303 · Cited by 35
Metadata
- Authors
- Lauss, G., Faruque, M. O., Schoder, K., Dufour, C., Viehweider, A., & Langston, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-01
- Volume
- 63
- Issue
- 1
- Pages
- 406-417
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2216305900
- Cited by
- 308
- References
- 12
- FWCI
- 24.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems. https://app.cochat.ai/papers/10.1109/tie.2015.2464308
- The paper
- Lauss, G., Faruque, M. O., Schoder, K., Dufour, C., Viehweider, A., & Langston, J. (2016). Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2015.2464308
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
