A Space-Vector PWM-Based Voltage-Balancing Approach With Reduced Current Sensors for Modular Multilevel Converter
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Arm voltage and submodule (SM) capacitor voltage balancing is a key factor for the safe and reliable operation of modular multilevel converters (MMCs). The arm voltage balancing is achieved through a zero-sequence voltage controller in carrier pulse-width modulation (CPWM). In this study, a dual space-vector pulse-width modulation (SVPWM) technique is proposed for an MMC, which eliminates the external controller for arm voltage balancing. In this approach, the three-phase top and bottom arms are independently controlled using SVPWM. In addition, the capacitor voltage balancing can be achieved using redundant switching vectors. However, this will increase the computational load on the space-vector modulator. Therefore, an external capacitor voltage-balancing approach is proposed to minimize the computational complexity. The proposed approach uses the direction of load current instead of the arm current in SM selection process. As such, the required number of current sensors is reduced to 50% in a three-phase system. The proposed modulation and voltage-balancing approach are simulated and experimentally verified on the MMC system with three-level flying capacitor (3L-FC) SMs. Simulation and experimental results show the successful balancing of the arm voltage and SM capacitors voltage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Circuit Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
Perez, M. A., Bernet, S., Rodriguez, J., Kouro, S., & Lizana, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310127 · Cited by 1,346 · cited 2×
“(SMs) in series to meet the required operating voltage [1], [2].”
BackgroundPou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406 · cited 1×
“culating current control along with a zero sequence voltage injection is employed in the carrier pulse-width modulation (CPWM) and NLC approaches [8], [9].”
Method
Cited by
Dekka, A., Wu, B., Fuentes, R. L., Perez, M., & Zargari, N. R. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2742938 · Cited by 576
“line-to-line voltages of an MMC, and it generates the phase voltages implicitly [62], [107].”
Self-citationModular Multilevel Converters for Transportation Electrification: Challenges and Opportunities
Ronanki, D., & Williamson, S. S. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2792330 · Cited by 345
“Most of these methods utilize the SM selection approach which can be achieved by either sorting algorithms or relative comparison logics [27], [28].”
BackgroundMethodReviews on multilevel converter and modulation techniques
Hasan, N. S., Rosmin, N., Osman, D. A. A., & Musta’amal@Jamal, A. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.163 · Cited by 178
Ronanki, D., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2884610 · Cited by 106
Capacitor Voltage Estimation Scheme With Reduced Number of Sensors for Modular Multilevel Converters
Abushafa, O. S. M., Gadoue, S. M., Dahidah, M. S. A., Atkinson, D. J., & Missailidis, P. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2797245 · Cited by 53
Metadata
- Authors
- Dekka, A., Wu, B., Zargari, N. R., & Fuentes, R. L.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-05
- Volume
- 63
- Issue
- 5
- Pages
- 2734-2745
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2324885734
- Cited by
- 128
- References
- 2
- FWCI
- 7.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.