Design and Analysis of a High-Efficiency DC–DC Converter With Soft Switching Capability for Renewable Energy Applications Requiring High Voltage Gain
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Renewable sources like solar photovoltaic (PV) and fuel cell stack are preferred to be operated at low voltages. For applications such as grid-tied systems, this necessitates high voltage boosting resulting in efficiency reduction. To handle this issue, this paper proposes a novel high voltage gain, high-efficiency dc-dc converter based on coupled inductor, intermediate capacitor, and leakage energy recovery scheme. The input energy acquired from the source is first stored in the magnetic field of coupled inductor and intermediate capacitor in a lossless manner. In subsequent stages, it is passed on to the output section for load consumption. A passive clamp network around the primary inductor ensures the recovery of energy trapped in the leakage inductance, leading to drastic improvement in the voltage gain and efficiency of the system. Exorbitant duty cycle values are not required for high voltage gain, which prevents problems such as diode reverse recovery. Presence of a passive clamp network causes reduced voltage stress on the switch. This enables the use of low voltage rating switch (with low “on-state” resistance), improving the overall efficiency of the system. Analytical details of the proposed converter and its hardware results are included.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Cited by
Forouzesh, M., Shen, Y., Yari, K., Siwakoti, Y. P., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2746750 · Cited by 431
Dual-Objective MPC of Community Energy Storage in LV Distribution Feeders with Rooftop Solar PV
Rahman, O., Robinson, D. A., Elphick, S., & Perera, S. (2021) · 2021 IEEE PES Innovative Smart Grid Technologies - Asia (ISGT Asia) · doi:10.1109/isgtasia49270.2021.9715615 · Cited by 3
Metadata
- Authors
- Das, M., & Agarwal, V.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2016-05
- Volume
- 63
- Issue
- 5
- Pages
- 2936-2944
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2232768636
- Cited by
- 193
- References
- 1
- FWCI
- 11.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.