SuperGraph: Spatial-Temporal Graph-Based Feature Extraction for Rotating Machinery Diagnosis
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Vibration signals always contain noise and irregularities, which makes spectrum analysis difficult to extract high-level features. Recently, graph theory has been applied to spectrum analysis to improve the performance of feature extraction. By converting the raw data into graphs, hidden structural and topological information can be obtained. In this article, a spatial-temporal graph-based feature extraction, called SuperGraph, for rotating machinery fault diagnosis is proposed. Specifically, graph theory-based spectrum analysis is used to construct the spatial-temporal graph. Then, the Laplacian matrix-based feature vector is extracted from the constructed spatial-temporal graph. By this means, the spatial-temporal graph is converted into the one-dimensional (1-D) vector for further constructing SuperGraph, where each node of the SuperGraph represents a spatial-temporal graph and the SuperGraph is composed of many local graphs. In the local graph, only the same type of nodes are connected to form a fully connected graph. Thus, the task of graph classification can be transformed into classifying the nodes in the SuperGraph. After graph convolutional network is established for learning and obtaining deep features, the label of nodes is identified from a$softmax$model. Experiments are conducted on two benchmarking datasets and a practical experimental platform to verify effectiveness of the proposed fault diagnosis method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The graph neural network model
Scarselli, F., Gori, M., Tsoi, A. C., Hagenbuchner, M., & Monfardini, G. (2009) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2008.2005605 · Cited by 9,582 · cited 1×
“proposed to build a neural network for data held in the graph domain based on graph theory [19].”
BackgroundShuman, D. I., Narang, S. K., Frossard, P., Ortega, A., & Vandergheynst, P. (2013) · IEEE Signal Processing Magazine · doi:10.1109/msp.2012.2235192 · Cited by 4,421 · cited 1×
“1) Graph convolution: Since traditional convolution operation cannot be directly applied to graphs, a generalization convolution method based on graph Laplacian has been developed in [25], as shown in (9).”
MethodDeep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188 · cited 1×
“Rotating machinery have significant possibility to suffer from a variety of damage and failures under extreme working condition [1], [2].”
BackgroundLei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191 · cited 1×
“The sudden failure often leads to machine breakdown with significant loss [3]–[5].”
BackgroundFault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Leite, V. C. M. N., Borges da Silva, J. G., Veloso, G. F. C., Borges da Silva, L. E., Lambert-Torres, G., Bonaldi, E. L., & de Lacerda de Oliveira, L. E. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345330 · Cited by 274 · cited 1×
“Among these, spectrum analysis, which mainly includes Fourier spectrum analysis, power spectrum analysis [8], cyclic spectrum [9], holospectrum analysis [10], and envelop spectrum analysis [11], has been widely used and proved to be effective for extracting fault information from vibration signals.”
Method
Cited by
Zhao, C., Zio, E., & Shen, W. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.109964 · Cited by 521
Tama, B. A., Vania, M., Lee, S., & Lim, S. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10293-3 · Cited by 345
A Comprehensive Survey on Deep Graph Representation Learning
Ju, W., Fang, Z., Gu, Y., Liu, Z., Long, Q., Qiao, Z., Qin, Y., Shen, J., Sun, F., Xiao, Z., et al. (2024) · Neural Networks · doi:10.1016/j.neunet.2024.106207 · Cited by 341
Hu, Z., Lou, S., Xing, Y., Wang, X., Cao, D., & Lv, C. (2022) · IEEE Transactions on Intelligent Vehicles · doi:10.1109/tiv.2022.3195635 · Cited by 176
“for their powerful learning capability, and are currently the most popular approach in many applications [300]–[303].”
BackgroundZhao, C., & Shen, W. (2023) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3175018 · Cited by 162
Metadata
- Authors
- Yang, C., Zhou, K., & Liu, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2022-04
- Volume
- 69
- Issue
- 4
- Pages
- 4167-4176
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W3157039246
- Cited by
- 183
- References
- 7
- FWCI
- 13.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: SuperGraph: Spatial-Temporal Graph-Based Feature Extraction for Rotating Machinery Diagnosis. https://app.cochat.ai/papers/10.1109/tie.2021.3075871
- The paper
- Yang, C., Zhou, K., & Liu, J. (2022). SuperGraph: Spatial-Temporal Graph-Based Feature Extraction for Rotating Machinery Diagnosis. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2021.3075871
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.